Table of Contents
Advertisement
Mode 3: Drag down the status bar, click shortcut icon
->SETTINGS>
Mode
4:
In
Connecting->DHCP.
Configuration page is shown as below：
Note:
1) If DHCP acquired IP, it will display dynamic IP address information on the location
of static IP configuration, cannot be modified, and there is a item of Use static DNS at
the bottom the alternative DNS server, when checked, you can modify the primary
DNS address and Secondary DNS address.
2) If DHCP is failed, the IP address will show as: 0.0.0.0.
3.2.3 Configuring PPPOE
You can select one of the following methods to enter the PPPOE configuration:
Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System
Settings-> Wireless & Networks -> Ethernet ->More ->PPPOE.
->Wireless & Networks-> Ethernet-> uncheck Use static IP.
the
main
screen,tap
17
on the status bar
->Network
Settings->LAN
Advertisement
Table of Contents
