Heta INSPIRE 40 Operating Instructions Manual
Hide thumbs
Also See for INSPIRE 40:
- Operating and installation instructions (28 pages) ,
- Operating instructions manual (13 pages) ,
- Operating and installation instructions (28 pages)
Advertisement
Table of Contents
- 1 Installation Instructions
- 2 Safety Clearances
- 3 The Chimney Connection
- 4 Draft Conditions
- 5 First Firing
- 6 Instructions for Use
- 7 Chimney Fires
- 8 Reduced Burning
- 9 Risk of Explosion
- 10 Operational Problems
- 11 Maintenance
- 12 Door Sealing
- 13 Cleaning the Glass
- Download this manual
See also:
Operating and Installation Instruction
Advertisement
Table of Contents
Related Manuals for Heta INSPIRE 40
Summary of Contents for Heta INSPIRE 40
- Page 1 INSPIRE 40/45 www.heta.dk www.heta.dk Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014 Revision 1.1 Nov 2014...
-
Page 2: Installation Instructions
The size of the nonflam- A stove gets hot. (In excess mable surface used to cover the floor of 90 degrees) Take care to en sure that children cannot come into contact with it. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... -
Page 3: The Chimney Connection
– in summer, for example. For connections to chimneys that are • No wind is blowing. run through ceilings, all national and • The chimney is too low and shel- Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... -
Page 4: First Firing
18% fumes and smoke. Correct firing using well seasoned wood provides optimal heat output and maximum economy. At the same time, correct Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... -
Page 5: Chimney Fires
Call the fire department. with the secondary air supply fully open to make sure that the chimney is Airflow regulation thoroughly heated. To adjust combustion airflow, use the Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... - Page 6 The wood will light in 2/3 minutes. Adjust the air slider for optimum combustion. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014...
-
Page 7: Reduced Burning
Do not leave the airsliders complet- ely open: Operation with the airsli- Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... -
Page 8: Risk Of Explosion
The test was carried out with the secondary air 65% open. The stove may only be installed on non-combustible floor. Stove data in accordance to ”norwegian firewall” Stove type Scan-Line series Distance to firewall in Distance to firewall in behind the stove at each side Inspire 40 Inspire 45 Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... -
Page 9: Operational Problems
The Inspire 40/45 has a nominal outside fresh air supply. output of less than 5kW and does not need additional ventilation in older properties where it will be ventilated by natural leakage. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... -
Page 10: Maintenance
Any unauthorised modifica • The smoke baffle tion of the stove and any use • The glass of non-original spares will • The sealing rope void the guarantee. • The grate frame Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014... - Page 11 Cleaning after sweeping the chimney and replacing the stones. Fig 3-7 Changing to back smoke outlet Fig. 8-15 Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014...
- Page 12 Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1.1:Jan 2014...
Need help?
Do you have a question about the INSPIRE 40 and is the answer not in the manual?
Questions and answers