Sony LBT-XGV8 Operating Instructions Manual page 7

3 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type B
Extend the FM lead
antenna horizontally.
AM loop antenna
Note
Keep the speaker cords away from the antennas to
prevent noise.
4 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
When using a TV
Turn on the TV and select the video input so you
can view the pictures from this system.
5 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
VOLTAGE SELECTOR
6 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
C O
A X I
A L adaptor).
F M
7 5
7 Set the color system according to your
TV while the power is off.
The color system
of your TV
NTSC
PAL
AUTO*
* When your TV automatically changes the color
system according to the input signal.
Notes
• When you play a VIDEO CD recorded in the
different color system from the one you set to the
unit, the picture image may be distorted.
• You cannot set the color system in the Power
Saving Mode.
120V
220V
230 ~ 240V
Do this
While holding down
DANCE, press ?/1.
While holding down
ROCK, press ?/1.
While holding down JAZZ,
press ?/1.
continued
GB
7