Download  Print this page

Waking Up To Music; Daily Timer - Sony LBT-XGV8 Operating Instructions Manual

Hide thumbs

Advertisement

Waking up to music

— Daily Timer

You can wake up to music at a preset time
every day. Make sure you have set the clock
(see "Setting the clock" on page 9).
1
Prepare the music source you want to
play.
• VIDEO CD/CD: Load a VIDEO CD/CD.
To start from a specific track, make a
program (see "Programming the VIDEO
CD/CD tracks" on page 14).
• Tape: Load a tape with the side you want
to play facing forward.
• Radio: Tune in the preset station you
want (see "Presetting radio stations" on
page 18).
2
Adjust the volume.
3
Press c/CLOCK SET (or CLOCK/TIMER
SET on the remote).
"SET" appears and "DAILY SET" flashes
in the display.
4
Press ENTER.
"ON" appears and the hour digits flash in
the display.
5
Set the time to start playback.
Press R/r repeatedly to set the hour, then
press ENTER.
The minute indication starts flashing.
Press R/r repeatedly to set the minute, then
press ENTER.
6
Set the time to stop playback following
the above procedure.
7
Press R/r repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8
Press ENTER.
The start time, stop time, and the music
source appear, then the original display
appears.
9
Turn off the system.
To
Do this
Check the setting
Press TIMER SELECT (or
CLOCK/TIMER SELECT
on the remote). Press R/r to
select "DAILY SELECT."
Then, press ENTER.
Change the setting
Start from step 1.
Cancel the timer
Press TIMER SELECT (or
operation
CLOCK/TIMER SELECT
on the remote). Press R/r to
select "TIMER OFF."
Then, press ENTER.
Notes
• When you use the Sleep Timer, Daily Timer will
not turn on the system until the Sleep Timer turns it
off.
• You cannot activate the Daily Timer and the
recording timer at the same time.
Tip
The power turns on 15 seconds before the preset time.
GB
27

Advertisement

Table of Contents

   Related Manuals for Sony LBT-XGV8

This manual is also suitable for:

Lbt-xgv6

Comments to this Manuals

Symbols: 0
Latest comments: