Sony LBT-XG100AV Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. game sync lbt-xg100av
  6. Service manual

Sony LBT-XG100AV Service Manual

Hide thumbs Also See for LBT-XG100AV:
Table of Contents

Advertisement

Quick Links

Download this manual
LBT-XG100AV/XG900AV
SERVICE MANUAL
Ver 1.0 2001.04
• LBT-XG100AV/XG900AV are composed of following models.
As for the service manual, it is issued for each component
model, then, please refer to it.
COMPONENT MODEL NAME FOR LBT-XG100AV/XG900AV.
COMPACT DISC DECK RECEIVER SYSTEM HCD-XG100AV HCD-XG900AV
FRONT SPEAKER SYSTEM
CENTER SPERAKER SYSTEM
REAR SPEAKER SYSTEM
HCR-XG100AV is composed of HCD-XG100AV, SS-CT210 and SS-RS210.
HCR-XG900AV is composed of HCD-XG900AV, SS-CT210 and SS-RS210.
SPECIFICATIONS
Power requirements
European models:
230 V AC, 50/60 Hz
Mexican model:
120 V AC, 50/60 Hz
Australian model:
230 – 240 V AC, 50/60 Hz
Other models:
120 V, 220 V or 230 – 240 V AC, 50/60 Hz
Adjustable with voltage selector
Power consumption
LBT-XG900AV
200 watts
0.6 watts (at the power saving mode)
LBT-XG100AV
230 watts
Approx. 355 × 425 × 450 mm
Dimensions (w/h/d)
Mass :
LBT-XG900AV
Approx. 14.5 kg
LBT-XG100AV
Approx. 16.0 kg
Supplied accessories:
AM loop antenna (1)
FM lead antenna (1)
Speaker cords (5)
Speaker pads (12)
Remote commander (1)
Batteries (2)
Design and specifications are subject to change without notice.
Sony Corporation
9-873-814-11
2001D0500-1
Home Audio Company
C 2001.4
Shinagawa Tec Service Manual Production Group
LBT-XG100AV
LBT-XG900AV
SS-XG100AV
SS-XG900AV
SS-CT210
SS-RS210
PARTS LIST
Part No.
1-418-230-11 COMMANDER, STANDARD (RM-SR11AV)
1-501-374-11 ANTENNA, LOOP (AM)
1-501-659-41 ANTENNA (FM) (XG100AV)
1-501-804-11 ANTENNA (FM) (XG900AV)
1-751-347-11 CORD, CONNECTION (10m) (for SS-RS210)
1-769-433-21 CORD, SPEAKER (2.5m) (for SS-CT210)
1-775-512-21 CORD, SPEAKER CONNECTION (2.5m)
4-210-254-01 CUSHION (FOOT) (for SS-XG100AV/XG900AV)
4-233-530-11 MANUAL, INSTRUCTION (ENGLISH)
4-233-530-31 MANUAL, INSTRUCTION (SPANISH) (XG100AV: AR, MX)
4-233-530-41 MANUAL, INSTRUCTION (ENGLISH, FRENCH, SPANISH)
4-233-530-51 MANUAL, INSTRUCTION (GERMAN, DUTCH, SWEDISH)
4-233-530-61 MANUAL, INSTRUCTION (ITALIAN, POLISH)
4-235-500-11 MANUAL, INSTRUCTION (ENGLISH) (XG900AV: AEP)
4-235-500-21 MANUAL, INSTRUCTION (HUNGARIAN, CZECH)
4-235-500-31 MANUAL, INSTRUCTION (TURKISH) (XG900AV: AEP)
4-235-500-41 MANUAL, INSTRUCTION (SLOVAKIAN) (XG900AV: AEP)
4-972-322-01 FOOT (Y) (for SS-CT210/RS210)
4-988-173-01 COVER, BATTERY (for RM-SR11AV)
COMPACT Hi-Fi STEREO SYSTEM
HCR-XG100AV/XG900AV
AEP Model
Australian Model
•Abbreviation
AR
: Argentine model
MX
: Mexican model
Description
ACCESSORIES & PACKING MATERIALS
********************************
(for SS-XG100AV/XG900AV)
(XG100AV: AR, AUS/XG900AV: UK)
(XG100AV: E2/XG900AV: AEP)
UK Model
LBT-XG900AV
E Model
LBT-XG100AV
Remark
(XG900AV: AEP)
(XG900AV: AEP)
(XG900AV: AEP)

Advertisement

Table of Contents
loading

Related Manuals for Sony LBT-XG100AV

Summary of Contents for Sony LBT-XG100AV

  • Page 1 AEP Model UK Model Ver 1.0 2001.04 LBT-XG900AV E Model • LBT-XG100AV/XG900AV are composed of following models. As for the service manual, it is issued for each component Australian Model model, then, please refer to it. LBT-XG100AV COMPONENT MODEL NAME FOR LBT-XG100AV/XG900AV.
  • Page 2 LBT-XG100AV/XG900AV REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...
  • Page 3 HCD-XG900AV E Model Australian Model HCD-XG100AV HCD-XG100AV/XG900AV are the amplifier, CD player, tape deck and tuner section in LBT-XG100AV/XG900AV. Photo: HCD-XG900AV This stereo system is equipped with the Dolby B-type Model Name Using Similar Mechanism HCD-XG80 noise reduction system*. * Manufactured under license from Dolby...
  • Page 4 AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH Mass : HCD-XG900AV Approx. 14.5 kg SONY PARTS WHOSE PART NUMBERS APPEAR AS HCD-XG100AV Approx. 16.0 kg SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY.

  • Page 5: Table Of Contents

    HCD-XG100AV/XG900AV TABLE OF CONTENTS SERVICING NOTES 7-29. Printed Wiring Boards – TC-A/TC-B/CD-L/ ..........4 CD-R (1)/CD-R (2) Boards – ......... 46 7-30. Schematic Diagram – TC-A/TC-B/CD-L/ GENERAL CD-R (1)/CD-R (2) Boards – ......... 47 Location of Controls ............5 7-31. Printed Wiring Board – TRANSFORMER Section– ..48 Setting the Time ..............

  • Page 6: Servicing Notes

    HCD-XG100AV/XG900AV SECTION 1 SERVICING NOTES • MODEL IDENTIFICATION NOTES ON HANDLING THE OPTICAL PICK-UP – Rear Panel – BLOCK OR BASE UNIT PART No. The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc.

  • Page 7: General

    HCD-XG100AV/XG900AV SECTION 2 This section is extracted from instruction manual. GENERAL LOCATION OF CONTROLS – Front Panel – 2 3456 789 q; A EJECT Z/Z B EJECT wj (17) GAME qs (24,26) STEREO/MONO wf (15) AUDIO L jack ws (26) GROOVE rs (21) SUPER WOOFER ra (21,27) AUDIO R jack wa (26)

  • Page 8: Setting The Time

    HCD-XG100AV/XG900AV – Rear Panel – 1 ANTENNA terminal 2 DJ MIX RETURN/SEND jack (AEP, UK Mexican models) 3 SUB WOOFER OUT jack 4 PHONO IN jack 5 MD IN/OUT jack 6 VIDEO/AUDIO IN jack 7 VIDEO OUT jack 8 DVD INPUT VIDEO/FRONT/REAR/CENTER/WOOFER jack 9 CD DIGITAL OUT OPTICAL terminal 0 FRONT SPEAKER terminal qa REAR/CENTER SURROUND SPEAKER terminal...

  • Page 9: Disassembly

    HCD-XG100AV/XG900AV SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. CASE (Page 7) 3-3. FRONT PANEL SECTION (Page 8) 3-4. COVER (TC), 3-5. MAIN BOARD, 3-6. MAIN BOARD TAPE MECHANISM DECK “FAN, D.C.

  • Page 10: Front Panel Section

    HCD-XG100AV/XG900AV 3-3. FRONT PANEL SECTION 1 wire (flat type) (15 core) (CN303) 1 wire (flat type) 2 two connectors (17 core) (CN304) (CN452, 702) 1 wire (flat type) 3 two screws (13 core) (CN431) (BVTP3 × 8) 3 screw (BVTP3 × 8) 4 two lugs 4 lug 2 connector...

  • Page 11: Main Board, "Fan, D.c. (M901) (Xg100Av)

    HCD-XG100AV/XG900AV 3-5. MAIN BOARD, “FAN, D.C. (M901) (XG100AV)” 1 wire (flat type) (13 core) (CN441) Mexican models 3 seven screws (BVTP3 × 8) 2 jumper plug 8 back panel 3 screw (BVTP3 × 8) 3 three screws (BVTP3 × 8) 7 fan, D.C.

  • Page 12: Cd Mechanism Deck (Cdm37M-5Bd32L)

    HCD-XG100AV/XG900AV 3-7. CD MECHANISM DECK (CDM37M-5BD32L) 1 wire (flat type) (19 core) (CN411) 4 three screws (BVTP3 × 8) 3 three screws (BVTP3 × 8) 7 Open the cable clamp. 2 connector (CN412) 4 two screws (BVTP3 × 8) 8 five screws (BVTP3 ×...

  • Page 13: Base Unit (Bu-5Bd32L)

    HCD-XG100AV/XG900AV 3-8. BASE UNIT (BU-5BD32L) 3 base unit (BU-5BD32L) 2 boss 1 BU fitting screw 3-9. DISC TABLE Note: When the disc table is installed, adjust the positions of roller cam and mark B as shown in the figure, then set to the groove of disc table.

  • Page 14: Test Mode

    HCD-XG100AV/XG900AV SECTION 4 TEST MODE [MC Cold Reset] [CD Delivery Mode] • The cold reset clears all data including preset data stored in the • This mode moves the optical pick-up to the position durable to RAM to initial conditions. Execute this mode when returning vibration.
  • Page 15 HCD-XG100AV/XG900AV [Aging Mode] 2. Tape Deck Section This mode can be used for operation check of tape deck section. • The sequence during the aging mode is following as below. Tape deck section work in parallel. • If an error occurred, stop display that step. •...

  • Page 16: Mechanical Adjustments

    HCD-XG100AV/XG900AV SECTION 5 SECTION 6 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS Precaution DECK SECTION 0 dB = 0.775 V 1. Clean the following parts with a denatured alcohol-moistened swab: Precaution record/playback heads pinch rollers 1. Demagnetize the record/playback head with a head demagne- erase head rubber belts tizer.
  • Page 17 HCD-XG100AV/XG900AV Record/Playback Head Azimuth Adjustment Adjustment Location: Playback Head (Deck A). Record/Playback/Erase Head (Deck B). DECK A DECK B Note: Perform this adjustments for both decks Procedure: 1. Mode: Playback (FWD) test tape MAIN board P-4-A100 MD OUT jack (J701) (10 kHz, –...
  • Page 18 HCD-XG100AV/XG900AV Specification values: DECK B REC Bias Adjustment J701 PB level: 47.2 to 53.0 mV (– 24.3 to – 23.3 dB) Procedure: 1. Mode: Record Adjustment Location: MAIN board FUNCTION: VIDEO MAIN board – MAIN BOARD (Conductor Side) – VIDEO AUDIO IN jack (J701) L-CH, R-CH ...

  • Page 19: Cd Section

    HCD-XG100AV/XG900AV E-F Balance (1 Track Jump) Check CD SECTION oscilloscope Note: (DC range) 1. CD Block is basically designed to operate without adjustment. There- fore, check each item in order given. BD board 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. TP (TE) 3.

  • Page 20: Diagrams

    HCD-XG100AV/XG900AV SECTION 7 DIAGRAMS 7-1. BLOCK DIAGRAM – CD SERVO Section – (AEP, UK, Mexican) FILTER DIGITAL SIGNAL PROCESSOR, J705 DIGITAL FILTER, D/A CONVERTER IC101 (1/2) RF AMP, 56 53 SEND FOCUS/TRACKING ERROR AMP R-CH IC103 DETECTOR CD D+5V DJ MIX PCMD RETURN R-CH...

  • Page 21: Block Diagram - Tuner/Tape Deck Section

    HCD-XG100AV/XG900AV 7-2. BLOCK DIAGRAM – TUNER/TAPE DECK Section – DECK PROCESS, DECK A/B SELECT, PB/REC EQ AMP, • R-ch is omitted due to same as L-ch. DOLBY NR AMP, ALC, AMS IC301 • SIGNAL PATH RV311 : TUNER (FM/AM) PB LEVEL (L) DOLBY PASS HP101 (DECK A)

  • Page 22: Block Diagram - Main Section (1/2)

    HCD-XG100AV/XG900AV 7-3. BLOCK DIAGRAM – MAIN Section (1/2) – DISTORTION DISTORTION (Page 22) ON/OFF SWITCH GUITAR AMP REC-L Q880 – 883 IC853 (Page 19) J802 SPEANA GUITAR AMP MIC AMP (Page 22) GUITAR IC852 IC850 (2/2) RV601 GUITAR LEVEL MD OUT J801 MIC AMP R-CH...

  • Page 23: Block Diagram - Main Section (2/2)

    HCD-XG100AV/XG900AV 7-4. BLOCK DIAGRAM – MAIN Section (2/2) – • R-ch is omitted due to same as L-ch. FEED • SIGNAL PATH BACK (Page 20) : AUDIO TA-MUTING (Page 20) R-CH SW-MUTING (Page 20) L IN POWER AMP (Page 20) IC801 D807 PROTECT...

  • Page 24: Block Diagram - Display/Key Control/Power Supply Section

    HCD-XG100AV/XG900AV 7-5. BLOCK DIAGRAM – DISPLAY/KEY CONTROL/POWER SUPPLY Section – (Page 20) (Page 21) (Page 20) FLUORESCENT INDICATOR TUBE DRIVER, SUB POWER BAND-PASS FILTER KEY CONTROL TRANSFORMER IC601 IC602 T901 EVER +5V RECT SYSTEM CONTROLLER (IC501) , REGULATOR BPF 0 D902 –...

  • Page 25: Note For Printed Wiring Boards And Schematic Diagrams

    HCD-XG100AV/XG900AV 7-6. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS • Circuit Boards Location Note on Printed Wiring Board: Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF • X : parts extracted from the component side. TRANS board SUB TRANS board •...

  • Page 26: Printed Wiring Board - Bd Board

    HCD-XG100AV/XG900AV 7-7. PRINTED WIRING BOARD – BD Board – • See page 23 for Circuit Boards Location. TP(GND) TP(VC) TP(RF) (AGCCON) TP(FE) TP(TE) MAIN BOARD TP(FE1) CN411 (Page 34) KSS-213DH • Semiconductor • Semiconductor Location Location Ref. No. Location Ref. No. Location Q101 IC101...

  • Page 27: Schematic Diagram - Bd Board

    HCD-XG100AV/XG900AV 7-8. SCHEMATIC DIAGRAM – BD Board – • • See page 35 for Waveforms. See page 49 for IC Block Diagrams. OPTICAL PICK-UP BLOCK (KSS-213DH) D+5V (SW) L-CH R-CH A+5V (SW) CD-DATA CD-CLK MAIN BOARD (2/3) CN411 SQ-DATA (Page 32) SQ-CLK M+7V (UNSW) •...

  • Page 28: Printed Wiring Boards - Cd Motor Section

    HCD-XG100AV/XG900AV 7-9. PRINTED WIRING BOARDS – CD MOTOR Section – • See page 23 for Circuit Boards Location. MAIN BOARD CN412 (Page 34)

  • Page 29: Schematic Diagram - Cd Motor Section

    HCD-XG100AV/XG900AV 7-10. SCHEMATIC DIAGRAM – CD MOTOR Section – • See page 49 for IC Block Diagram. TABLE MOTOR DRIVER LED DRIVE (Page 32) MAIN BOARD (2/3) CN412 DISC TABLE SENSOR • Voltages and waveforms are dc with respect to ground under no-signal conditions.

  • Page 30: Printed Wiring Board - Audio Board

    HCD-XG100AV/XG900AV 7-11. PRINTED WIRING BOARD – AUDIO Board – • See page 23 for Circuit Boards Location. MAIN BOARD (Page 34) CN303 AUDIO BOARD (24) 1-675-753- (CHASSIS) – B DECK – HPRE101 – A DECK – RECORD/PLAYBACK HP101 ERASE (PLAYBACK) L-CH L-CH R-CH...

  • Page 31: Schematic Diagram - Audio Board

    HCD-XG100AV/XG900AV 7-12. SCHEMATIC DIAGRAM – AUDIO Board – • See page 49 for IC Block Diagram. (PALYBACK) PB EQ AMP (DECK A) PB LEVEL (L) (DECK A) R492 1.5K –7 R491 820 PB EQ AMP (DECK B) PB LEVEL (L) (DECK B) R482 1.5K –7...

  • Page 32: Printed Wiring Board - Leaf Sw Board

    HCD-XG100AV/XG900AV 7-13. PRINTED WIRING BOARD – LEAF SW Board – • See page 23 for Circuit Boards Location. DECK B DECK A PLUNGER PLUNGER (DECK B PLAY) (DECK B 120/70) (DECK A PLAY) (DECK B HALF) (DECK A REC) (DECK A 120/70) (DECK A HALF) 1-676-219- MAIN BOARD...

  • Page 33: Schematic Diagram - Main Board (1/3)

    HCD-XG100AV/XG900AV 7-15. SCHEMATIC DIAGRAM – MAIN Board (1/3) – • See page 49 for IC Block Diagram. (Page 33) (Page 32) (Page 32) (Page 41) (Page 32) (Page 39) (Page 33) • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions.

  • Page 34: Schematic Diagram - Main Board (2/3)

    HCD-XG100AV/XG900AV 7-16. SCHEMATIC DIAGRAM – MAIN Board (2/3) – • See page 35 for Waveforms. (Page 33) (Page 31) (Page 33) (Page 31) (Page 43) (Page 25) (Page 27) (Page (Page 29) (Page 30) (Page 33) (Page 31) 〈〈 〉〉 : RECORD •...

  • Page 35: Schematic Diagram - Main Board (3/3)

    HCD-XG100AV/XG900AV 7-17. SCHEMATIC DIAGRAM – MAIN Board (3/3) – (Page 32) (Page 41) (Page 31) (Page 32) (Page 32) (Page 37) (Page 32) (Page 31) (Page 37) • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER (FM/AM) ) : CD PLAY...

  • Page 36: Printed Wiring Board - Main Board

    HCD-XG100AV/XG900AV 7-18. PRINTED WIRING BOARD – MAIN Board – • See page 23 for Circuit Boards Location. J705 J703 J701 DJ MIX DVD INPUT VIDEO J702 M901 (XG100AV) J704 AUDIO IN RETURN SEND PHONO IN MD IN MD OUT FRONT REAR (FAN) VIDEO...
  • Page 37 HCD-XG100AV/XG900AV • Semiconductor • Waveforms Location – BD Board – – MAIN Board – Ref. No. Location 1 IC101 yj (XTAO) 5 IC101 wh (MDP) (CD Play Mode) 1 IC501 0 (XC-IN) D191 D192 D193 D194 D501 D534 3.1 Vp-p 2.5 Vp-p 1.8 Vp-p D801...

  • Page 38: Printed Wiring Board - Pa Board

    HCD-XG100AV/XG900AV 7-19. PRINTED WIRING BOARD – PA Board – • See page 23 for Circuit Boards Location. • Semiconductor Location (Page 34) (Page 34) Ref. No. Location MAIN BOARD MAIN BOARD CN902 CN901 D401 D402 D403 PA BOARD D404 (XG900AV) D405 (XG100AV) D406...

  • Page 39: Schematic Diagram - Pa Board

    HCD-XG100AV/XG900AV 7-20. SCHEMATIC DIAGRAM – PA Board – (Page 41) (Page (Page 39) (Page (Page 48) (Page (Page 33) • Voltages and waveforms are dc with respect to ground The components identified by mark 0 or dotted under no-signal (detuned) conditions. line with mark 0 are critical for safety.

  • Page 40: Printed Wiring Board - Surround Board

    HCD-XG100AV/XG900AV 7-21. PRINTED WIRING BOARD – SURROUND Board – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D101 D151 D191 IC101 Q101 Q151 Q181 1-680-176- (CHASSIS) MAIN BOARD PA BOARD NO201 CN805 (Page 34) (Page 36)

  • Page 41: Schematic Diagram - Surround Board

    HCD-XG100AV/XG900AV 7-22. SCHEMATIC DIAGRAM – SURROUND Board – (Page 31) (Page 37) The components identified by mark 0 or dotted • Voltages are dc with respect to ground under no-signal line with mark 0 are critical for safety. (detuned) conditions. Replace only with part number specified.

  • Page 42: Printed Wiring Boards - Mic/Front Input/Headphones Boards

    HCD-XG100AV/XG900AV 7-23. PRINTED WIRING BOARDS – MIC/FRONT INPUT/HEADPHONES Boards – • See page 23 for Circuit Boards Location. MIC BOARD (Page 46) • Semiconductor TC-A BOARD Location NO805 Ref. No. Location (Page 34) MAIN BOARD IC850 CN452 IC852 IC853 Q880 Q881 Q882 Q883...

  • Page 43: Schematic Diagram - Mic/Front Input/Headphones Boards

    HCD-XG100AV/XG900AV 7-24. SCHEMATIC DIAGRAM – MIC/FRONT INPUT/HEADPHONES Boards – (Page 47) (Page 33) (Page 31) (Page 37) • Voltages are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER (FM/AM)

  • Page 44: Printed Wiring Board - Panel Fl Board

    HCD-XG100AV/XG900AV 7-25. PRINTED WIRING BOARD – PANEL FL Board – • See page 23 for Circuit Boards Location. PANEL FL BOARD FL601 FLUORESCENT INDICATOR TUBE D601, S608 TIMER POWER SAVE/DEMO SELECT (STANDBY) FUNCTION SLEEP DISPLAY c/CLOCK SET SPECTRUM GAME ANALYZER 1-680-169- (11) S601 –...

  • Page 45: Schematic Diagram - Panel Fl Board

    HCD-XG100AV/XG900AV 7-26. SCHEMATIC DIAGRAM – PANEL FL Board – • • See page 35 for Waveform. See page 49 for IC Block Diagram. (Page 47) (Page 47) (Page 32) • Voltages and waveforms are dc with respect to ground (Page 45) under no-signal (detuned) conditions.

  • Page 46: Printed Wiring Boards - Panel Vr/Illumination Boards

    HCD-XG100AV/XG900AV 7-27. PRINTED WIRING BOARDS – PANEL VR/ILLUMINATION Boards – • See page 23 for Circuit Boards Location. (Page 42) ILLUMINATION BOARD PANEL FL BOARD CN602 D791 (ILLUMINATION) (11) PANEL VR BOARD (CHASSIS) D717, S713 GROOVE S736 ROTARY ENCODER D708, S719 VOLUME DANCE D706, S717...

  • Page 47: Schematic Diagram - Panel Vr/Illumination Boards

    HCD-XG100AV/XG900AV 7-28. SCHEMATIC DIAGRAM – PANEL VR/ILLUMINATION Boards – • See page 49 for IC Block Diagram. (Page 43) • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER (FM/AM)

  • Page 48: Printed Wiring Boards - Tc-A/Tc-B/Cd-L/Cd-R (1)/Cd-R (2) Boards

    HCD-XG100AV/XG900AV 7-29. PRINTED WIRING BOARDS – TC-A/TC-B/CD-L/CD-R (1)/CD-R (2) Boards – • See page 23 for Circuit Boards Location. (Page 42) (Page 42) PANEL FL PANEL FL BOARD BOARD NO601 NO602 CD-L BOARD TC-A BOARD TC-B BOARD LID (CD) OPEN/CLOSE D612, S616 D611, S615 DISC 5...

  • Page 49: Schematic Diagram - Tc-A/Tc-B/Cd-L/Cd-R (1)/Cd-R (2) Boards

    HCD-XG100AV/XG900AV 7-30. SCHEMATIC DIAGRAM – TC-A/TC-B/CD-L/CD-R (1)/CD-R (2) Boards – (Page 43) (Page 41) (Page 43)

  • Page 50: Printed Wiring Board - Transformer Section

    HCD-XG100AV/XG900AV 7-31. PRINTED WIRING BOARDS – TRANSFORMER Section– 7-32. SCHEMATIC DIAGRAM – TRANSFORMER Section – • See page 23 for Circuit Boards Location. PA BOARD NO702 (Page 36) (Page 37) TRANS BOARD (Page 37) PA BOARD CN801 (Page 36) (MX) T951 POWER TRANSFORMER...
  • Page 51 HCD-XG100AV/XG900AV • IC Block Diagrams – BD Board – IC101 CXD2587Q ERROR DIGITAL CORRECTOR ASYMMETRY DIGITAL CORRECTOR OPERATIONAL LRCK AMPLIFIER ANALOG SWITCH PCMD INTERFACE DEMODULATOR CONVERTER EMPH XVDD XTAI TIMING LOGIC CLOCK XTAO XTSL GENERATOR XVSS TES1 AVDD1 TEST AOUT1 SERVO DSP PWM GENERATOR AIN1...
  • Page 52 HCD-XG100AV/XG900AV IC103 CXA2568M-T6 HOLD APC PD AMP LC/PD APC LD AMP – LD ON – – – HOLD SW AGC CONT AGC VTH 50µA RF BOT – – – – RFTC RF SUMMING AMP RF EQ AMP RF I RF O –...
  • Page 53 HCD-XG100AV/XG900AV – AUDIO Board – IC602 µPC1330HA INVERTER COMPARATER SW P1 CONT GND SW R1 GND SW P2 GND SW R2 – MAIN Board – IC101 M62493FP 59 58 57 56 5BAND GRAPHIC EQUALIZER VOL OUT2 IN E2 – – IN D2 –...
  • Page 54 HCD-XG100AV/XG900AV IC191 BA7615N MUTE 75Ω LOGIC IC201 M62464FP 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 DUAL-TIME CONSTANT MODIFIED DO-SW FULL WAVE DIFFERENCE B-TYPE RECTIFER AMPLIFIERS THRESHOLD SWITCHES NR DECODER L+R L-R NGC3 SEQUENCER...
  • Page 55 HCD-XG100AV/XG900AV – PANEL FL Board – – PANEL VR Board – IC602 BA3830F IC701 NJU3716L RESET RESET 18 17 16 15 14 13 REFERENCE CURRENT REFERENCE CURRENT CONTROL LINE NF CIRCUIT LINE IN BAND – PASS SHIFT REGISTER FILTER LATCH CIRCUIT REC NF REC IN –...

  • Page 56: Ic Pin Function Description

    HCD-XG100AV/XG900AV 7-33. IC PIN FUNCTION DESCRIPTION • MAIN BOARD IC501 M30622MAA-A92FP (SYSTEM CONTROLLER (CD MECHANISM CONTROL)) Pin No. Pin Name Description STK-POWER Power amplifier on/off selection signal output “L”: standby mode, “H”: power amplifier on Power on/off control signal output for the audio system (+5V) and deck, panel, audio system POWER (+7V) and FM/AM tuner unit (+10V) “L”: standby mode, “H”: power on F-RELAY...
  • Page 57 HCD-XG100AV/XG900AV Pin No. Pin Name Description CLOCK-OUT Not used (open) 40, 41 NO-USE Not used (open) Filament on/off selection signal output for the fluorescent indicator tube (FL601) FL OFF “L”: filament off, “H”: filament on Not used in this set STBY RELAY Main power on/off control signal output “L”: standby mode, “H”: power on Sync bass frequency normal/high selection signal output terminal...
  • Page 58 HCD-XG100AV/XG900AV Pin No. Pin Name Description Whether a music is present or not from HA12215F (IC301) is detected at automatic music sensor AMS-IN “L”: music is present, “H”: music is not present Line muting on/off selection signal output to the HA12215F (IC301) TC-MUTE “L”: muting off, “H”: muting on Recording/playback/pass selection signal output to the HA12215F (IC301)
  • Page 59 HCD-XG100AV/XG900AV • PANEL FL BOARD IC601 TMP88CP76F-1B71 (FLUORESCENT INDICATOR TUBE DRIVER, KEY CONTROL) Pin No. Pin Name Description SIRCS Remote control signal input from the remote control receiver (IC702) KEY POWER Power save/demonstration switch (S609 POWER SAVE/DEMO (STANDBY)) input terminal SAVE/DEMO “L”...
  • Page 60 HCD-XG100AV/XG900AV Pin No. Pin Name Description 44 to 66 SEG-1 to SEG-23 Segment drive signal output to the fluorescent indicator tube (FL601) LED STANDBY LED drive signal output of the I/1 indicator (D601) “H”: LED on — Power supply terminal (–35V) (for fluorescent indicator tube drive) —...

  • Page 61: Exploded Views

    HCD-XG100AV/XG900AV SECTION 8 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark may have some difference from the original are seldom required for routine service.

  • Page 62: Front Panel Section-1

    HCD-XG100AV/XG900AV 8-2. FRONT PANEL SECTION-1 TCM-230PWR42 not supplied not supplied supplied supplied supplied not supplied not supplied not supplied Front panel section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-232-080-01 COVER (TC) 4-959-229-11 DETENT, CASSETTE X-4953-376-1 LID (TC) ASSY 4-225-509-01 HOLDER (DECK-A) 4-232-085-01 SPRING (TC-LID)

  • Page 63: Front Panel Section-2

    HCD-XG100AV/XG900AV 8-3. FRONT PANEL SECTION-2 not supplied not supplied (ILLUMINATION board) not supplied supplied with S736 supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-951-620-01 SCREW (2.6X8), +BVTP 1-773-150-11 WIRE (FLAT TYPE) (21 CORE) 4-224-104-11 DAMPER X-4953-382-1 PANEL ASSY, FRONT (XG900AV) X-4953-374-1 PANEL (CD) ASSY, SUB...

  • Page 64: Chassis Section

    HCD-XG100AV/XG900AV 8-4. CHASSIS SECTION not supplied XG100AV not supplied not supplied (SURROUND board) T951 supplied not supplied not supplied not supplied CDM37M-5BD32L supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. not supplied Ref.

  • Page 65: Cd Mechanism Deck Section (Cdm37M-5Bd32L)

    HCD-XG100AV/XG900AV 8-5. CD MECHANISM DECK SECTION (CDM37M-5BD32L) supplied M201 supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-987-976-01 SCREW, STEP * 514 A-4673-765-A CD MOTOR BOARD, COMPLETE 4-944-490-01 BELT (TIMING) 4-978-426-01 INDICATOR (NO.) A-4660-978-A GEAR (PULLEY) ASSY * 516 1-659-059-13 LED BOARD 4-978-421-01 GEAR (MID)

  • Page 66: Base Unit Section (Bu-5Bd32L)

    HCD-XG100AV/XG900AV 8-6. BASE UNIT SECTION (BU-5BD32L) M101 M102 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 601...

  • Page 67: Tape Mechanism Deck Section-1 (Tcm-230Pwr42)

    HCD-XG100AV/XG900AV 8-7. TAPE MECHANISM DECK SECTION-1 (TCM-230PWR42) Tape mechanism deck section-2 HP101 HRPE101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-376-464-11 SCREW (+PTT 2.6X6), GROUND POINT 3-017-366-01 BASE (PINCH LEVER REV) 3-911-116-42 RIVET, PUSH 3-016-567-02 SPRING (CASSETTE), LEAF 3-016-574-01 SPRING (HEAD), TENSION A-2007-849-A AUDIO BOARD, COMPLETE X-3374-156-5 PINCH LEVER (REV) ASSY...

  • Page 68: Tape Mechanism Deck Section-2 (Tcm230Pwr42)

    HCD-XG100AV/XG900AV 8-8. TAPE MECHANISM DECK SECTION-2 (TCM-230PWR42) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-4952-881-1 CHASSIS ASSY, MAIN 4-228-450-01 SPRING (REVERSE SLIDER), TORSION 3-041-946-01 BELT (CAPSTAN B) 3-019-208-01 WASHER, STOPPER 4-227-239-01 BELT (CAPSTAN C) A-2004-795-A CHASSIS (A) ASSY, SUB X-3378-247-1 FLYWHEEL (A-FWD) ASSY 1-454-887-21 SOLENOID, PLUNGER X-3378-249-1 FLYWHEEL (B-FWD) ASSY...

  • Page 69: Electrical Parts List

    HCD-XG100AV/XG900AV SECTION 9 ELECTRICAL PARTS LIST AUDIO NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
  • Page 70 HCD-XG100AV/XG900AV AUDIO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R609 1-249-433-11 CARBON 1/4W C157 1-163-009-11 CERAMIC CHIP 0.001uF R611 1-249-409-11 CARBON 1/4W C159 1-163-019-00 CERAMIC CHIP 0.0068uF 10% R612 1-249-409-11 CARBON 1/4W C161 1-126-206-11 ELECT CHIP 100uF 6.3V C162...
  • Page 71 HCD-XG100AV/XG900AV CD MOTOR CD-L CD-R (1) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R162 1-216-101-00 METAL CHIP 150K 1/10W < LED > R171 1-216-078-00 RES-CHIP 1/10W R172 1-216-073-00 RES-CHIP 1/10W D741 8-719-058-04 LED SEL5223S-TP15 (NON-STOP) R173 1-216-077-00 RES-CHIP 1/10W...
  • Page 72 HCD-XG100AV/XG900AV CD-R (2) FRONT INPUT HEADPHONES ILLUMINATION LEAF SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ILLUMINATION BOARD 1-680-183-11 CD-R (2) BOARD ******************* (Included in MAIN BOARD, COMPLETE) ************** < CAPACITOR > < CAPACITOR > C751 1-162-306-11 CERAMIC 0.01uF...
  • Page 73 HCD-XG100AV/XG900AV LEAF SW MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C169 1-130-479-00 MYLAR 0.0047uF 5% S1006 1-771-333-11 SWITCH, LEAF (DECK B HALF) C170 1-130-477-00 MYLAR 0.0033uF 5% S1008 1-771-205-11 SWITCH, LEAF (DECK B 120/70) C171 1-126-964-11 ELECT 10uF...
  • Page 74 HCD-XG100AV/XG900AV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C246 1-130-469-00 MYLAR 680PF C562 1-164-156-11 CERAMIC CHIP 0.1uF C564 1-104-660-11 ELECT 47uF C247 1-136-153-00 FILM 0.01uF C598 1-163-038-00 CERAMIC CHIP 0.1uF C248 1-136-153-00 FILM 0.01uF C599 1-104-660-11 ELECT 47uF...
  • Page 75 HCD-XG100AV/XG900AV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C772 1-164-156-11 CERAMIC CHIP 0.1uF D803 8-719-988-61 DIODE 1SS355TE-17 C774 1-164-156-11 CERAMIC CHIP 0.1uF C775 1-164-156-11 CERAMIC CHIP 0.1uF D804 8-719-988-61 DIODE 1SS355TE-17 C776 1-164-156-11 CERAMIC CHIP 0.1uF D805 8-719-988-61 DIODE 1SS355TE-17...
  • Page 76 HCD-XG100AV/XG900AV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-296-11 SHORT 1-216-295-11 SHORT R116 1-216-842-11 METAL CHIP 1/16W JR11 1-216-296-11 SHORT R117 1-216-833-11 METAL CHIP 1/16W R118 1-216-841-11 METAL CHIP 1/16W JR191 1-216-295-11 SHORT R119 1-216-825-11 METAL CHIP 2.2K 1/16W...
  • Page 77 HCD-XG100AV/XG900AV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R301 1-216-839-11 METAL CHIP 1/16W R302 1-216-825-11 METAL CHIP 2.2K 1/16W R519 1-216-809-11 METAL CHIP 1/16W R303 1-216-809-11 METAL CHIP 1/16W R520 1-216-809-11 METAL CHIP 1/16W (XG900AV) R304 1-216-809-11 METAL CHIP...
  • Page 78 HCD-XG100AV/XG900AV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R583 1-216-809-11 METAL CHIP 1/16W R709 1-216-821-11 METAL CHIP 1/16W R584 1-216-809-11 METAL CHIP 1/16W (AEP, UK, MX) R585 1-216-809-11 METAL CHIP 1/16W R710 1-216-821-11 METAL CHIP 1/16W R586 1-216-809-11 METAL CHIP...
  • Page 79 HCD-XG100AV/XG900AV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RV351 1-238-600-11 RES, ADJ, CARBON 10K R807 1-249-429-11 CARBON 1/4W R809 1-249-417-11 CARBON 1/4W < VIBRATOR > R850 1-249-417-11 CARBON 1/4W R852 1-249-441-11 CARBON 100K 1/4W X501 1-567-098-41 VIBRATOR, CRYSTAL (32.768kHz) X502...
  • Page 80 HCD-XG100AV/XG900AV Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C802 1-162-290-31 CERAMIC 470PF C895 1-107-721-11 ELECT 4.7uF 100V C803 1-162-286-21 CERAMIC 220PF C902 1-164-159-21 CERAMIC 0.1uF C804 1-126-967-11 ELECT 47uF C903 1-126-933-11 ELECT 100uF C807 1-128-560-11 ELECT 22uF 100V C904...
  • Page 81 HCD-XG100AV/XG900AV Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L402 1-420-872-00 COIL, AIR-CORE (XG900AV) R414 1-260-076-11 CARBON 1/2W L403 1-420-872-00 COIL, AIR-CORE (XG900AV) L404 1-420-872-00 COIL, AIR-CORE L405 1-420-872-00 COIL, AIR-CORE R415 1-260-076-11 CARBON 1/2W (XG900AV) <...
  • Page 82 HCD-XG100AV/XG900AV PANEL FL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R827 1-249-441-11 CARBON 100K 1/4W A-4475-589-A PANEL FL BOARD, COMPLETE R828 1-247-903-00 CARBON 1/4W ************************ R831 1-249-441-11 CARBON 100K 1/4W (XG100AV) 4-225-511-01 HOLDER FL TUBE 4-949-935-81 CUSHION (FL) R832 1-249-441-11 CARBON...
  • Page 83 HCD-XG100AV/XG900AV PANEL FL PANEL VR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > R661 1-249-410-11 CARBON 1/4W R601 1-249-429-11 CARBON 1/4W < SWITCH > R602 1-249-437-11 CARBON 1/4W R603 1-247-807-31 CARBON 1/4W S601 1-762-875-21 SWITCH, KEYBOARD (DISPLAY) R604 1-249-437-11 CARBON...
  • Page 84 HCD-XG100AV/XG900AV PANEL VR SUB TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > R780 1-249-403-11 CARBON 1/4W R781 1-249-403-11 CARBON 1/4W IC701 8-759-567-59 IC NJU3716L IC702 8-759-827-68 IC NJL62H400A-1 R782 1-249-403-11 CARBON 1/4W (REMOTE CONTROL RECEIVER) R783 1-249-403-11 CARBON...
  • Page 85 HCD-XG100AV/XG900AV SUB TRANS SURROUND TABLE SENSOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > < IC > CN901 1-564-321-00 PIN, CONNECTOR 2P IC101 8-749-017-19 IC STK443-050 * CN902 1-564-321-21 PIN, CONNECTOR 2P (AEP, UK, MX, AUS) CN902 1-568-106-11 PIN, CONNECTOR 4P (E2, EA, SP, AR) <...
  • Page 86 HCD-XG100AV/XG900AV TC-A TC-B TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-680-171-11 TC-A BOARD S614 1-762-875-21 SWITCH, KEYBOARD (CD SYNC) S615 1-762-875-21 SWITCH, KEYBOARD (h) *********** < LED > S616 1-762-875-21 SWITCH, KEYBOARD (H) S617 1-762-875-21 SWITCH, KEYBOARD (x) D621 8-719-058-03 LED SEL5423E-TP15 (H)
  • Page 87 HCD-XG100AV/XG900AV Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-773-150-11 WIRE (FLAT TYPE) (21 CORE) 1-790-287-11 WIRE (FLAT TYPE) (19 CORE) 0 153 1-575-653-11 CORD, POWER (MX) 0 153 1-696-847-11 CORD, POWER (AUS) 0 153 1-777-071-81 CORD, POWER (AEP, UK, EA, SP) 0 153 1-783-941-12 CORD, POWER (AR) 0 153...
  • Page 88 HCD-XG100AV/XG900AV REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.04...
  • Page 89 SS-XG100AV Photo: SS-GV8 • SS-GV8 is the speaker system in LBT-GV8. • SS-GV10 is the speaker system in LBT-GV10AV. • SS-XG80/XG700 are the speaker system in LBT-XG80/XG700. • SS-XG100AV/XG900AV are the speaker system in LBT-XG100AV/XG900AV. SPECIFICATIONS SS-GV8/XG80 SS-GV10AV/XG100AV/XG700/XG900AV Speaker system...
  • Page 90 SS-GV8/GV10AV/XG80/XG100AV/XG700/XG900AV EXPLODED VIEW AND PARTS LIST NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they may have some difference from the original are seldom required for routine service. Some one. delay should be anticipated when ordering •...
  • Page 91 SS-GV8/GV10AV/XG80/XG100AV/XG700/XG900AV MEMO...
  • Page 92 SS-GV8/GV10AV/XG80/XG100AV/XG700/XG900AV REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.03...
  • Page 93 SS-CT210 / RC210 / RS210 SERVICE MANUAL AEP Model UK Model Ver 1.0 2001.04 E Model Australian Model Photo: SS-CT210 Photo: SS-RS210 • SS-CT210/RS210 are speaker systems in LBT-XG100AV/XG900AV/GV10AV. COMPONENT MODEL NAME FOR THESE SYSTEM SS-RC210 Center Speaker SS-CT210 Rear Speaker SS-RS210 SPECIFICATIONS SS-CT210...
  • Page 94 SS-CT210/RC210/RS210 EXPLODED VIEWS AND PARTS LIST NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they may have some difference from the original are seldom required for routine service. Some one. delay should be anticipated when ordering •...
  • Page 95 SS-CT210/RC210/RS210 (2) REAR SPEAKER SECTION (SS-RS210) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-874-614-11 SCREW +BVTP 3.5X14 4-983-074-01 BRACKET, HOOK X-4952-769-1 FRAME ASSY, GRILLE 7-685-648-79 SCREW +BV 3X12 TYPE2 IT-3 A-4412-821-A CABINET ASSY, SPEAKER (E/AUS) 1-537-332-11 TERMINAL BOARD A-4412-822-A CABINET ASSY, SPEAKER (AEP/UK) 1-529-346-11 SPEAKER (10cm)
  • Page 96 SS-CT210/RC210/RS210 Ref. No. Part No. Description Remark ACCESSORIES & PACKING MATERIALS ******************************* 1-751-347-11 CORD, CONNECTION (for SS-RS210) 1-769-433-21 CORD, SPEAKER (for SS-CT210) 4-972-322-01 FOOT (Y) 4-983-074-01 BRACKET, HOOK...
  • Page 97 SS-CT210/RC210/RS210 MEMO...
  • Page 98 SS-CT210/RC210/RS210 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.04...

This manual is also suitable for:

Lbt-xg900avHcr-xg100avHcr-xg900av

Table of Contents