Table of Contents
Advertisement
Recording a CD by specifying
track order
— Program Edit
1
Load VIDEO CD/CDs and a recordable
tape.
2
Program VIDEO CD/CD and tracks
following step 1 to 6 in "Programming
the VIDEO CD/CD tracks" on page 14.
3
Press CD SYNC.
Deck B stands by for recording.
4
Press DIRECTION repeatedly to select
g to record on one side.
Select j (or RELAY) to record on
both sides.
5
Press X.
Recording starts.
To record a disc with MP3 files by
specifying file order
After step 1, program the MP3 files following
the procedures in "To program the MP3 files"
on page 14, then proceed to step 3 above.
Tip
To check the required tape length for recording a
VIDEO CD/CD, press EDIT after you have loaded a
VIDEO CD/CD and switched function to CD. The
required tape length for the currently selected VIDEO
CD/CD appears, followed by the total playing time
for side A and side B respectively (Tape Select Edit).
Note
You cannot use Tape Select Edit for discs containing
over 20 tracks or MP3 files.
Timer-recording radio
programs
To timer-record, you must preset the radio
station (see "Presetting radio stations" on page
18) and set the clock (see "Setting the clock"
on page 9) beforehand.
1
Tune in the preset radio station (see
"Listening to the radio" on page 20).
2
Press c/CLOCK SET (or CLOCK/TIMER
SET on the remote).
3
Press R/r repeatedly to select "REC
SET," then press ENTER.
"ON" appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press R/r to set the hour, then press ENTER.
The minute indication starts flashing.
Press R/r to set the minute, then press
ENTER.
5
Set the time to stop recording following
the above procedure.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., "TUNER FM 5"), then the original
display appears.
6
Insert a recordable tape into deck B.
7
Turn off the power.
When the recording starts, the volume level
is set to the minimum.
continued
GB
23
Hide quick links:
Advertisement
Table of Contents
