Download  Print this page


To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape. However, be
careful not to cover the detector slots which allow the
tape player to automatically detect the type of tape.
Tab of side B
Tab of side A
Break off the
cassette tab of
side A
Before placing a cassette in the tape
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
When using a tape longer than 90
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding, etc.
frequently. The tape may get entangled in the tape
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
In case color irregularity is observed
on nearby a TV screen
With the magnetically shielded type of speaker
system, the speakers can be installed near a TV set.
However, color irregularity may still be observed on
the TV screen depending on the type of your TV set.
If color irregularity observed...
Turn off the TV set once, then turn it on after 15 to 30
If color irregularity is observed
Place the speakers farther away from the TV set.


Table of Contents

   Related Manuals for Sony LBT-XGV8

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: