3. At the prompt, type in the BIN file which supports your display.
When you are sure that you have entered the file name correctly
press <Enter>. The screen will ask "Do you want to save?" If
you wish to continue press Y. If you change your mind or have
made a mistake press N.
4. If you decide to continue, the screen will issue a prompt which
will then ask "Are you sure to program (Y/N)?" If you wish to
continue, press Y. Press N to exit the program.
The new VGA configuration will then write to the ROM BIOS
chip. This configuration will remain the same until you run the
AWDFLASH.EXE program and change the settings.
30
PCM-5820/5820L User's Manual