Installing E-Move - Decon wheel e-move User Manual

Installing e-move

Make sure the correct adapter plate is fitted to your wheelchair before installation.
1. Start fitting e-move to your wheelchair. The wheels have a quick release axle (QR axle).
Fold the quick release handle (A, Ill. 1) out when installing.
2. When installing the right wheel you need to lift the wheelchair up a little with your left hand
while simultaneously grasping the bottom of the battery holder to stop it from rotating (Ill. 2). Then
insert the QR axle (Ill. 3). It is very important that the axle be pressed in far enough, otherwise the
QR axle may come off. See illustration (D).
Decon Wheel AB Tel + 46 (0) 345-408 80
Landerydsvägen Fax +46 (0) 345-408 95
314 22 Hyltebruk www.decon.se
Sweden info@decon.se