Charging Problems - Decon wheel e-move User Manual

Hide thumbs Also See for e-move:
Table of Contents

Advertisement

Charging problems

If the battery or charger develop any faults during charging, the green charging light and the
reconditioning light on the charger and/or the battery's capacity lights will start to flash.
1. The charging light and the reconditioning light flash simultaneously (figure 1):
• Faulty battery. Replace the battery with a new one.
2. The fourth capacity light on the battery starts to flash (figure 2):
• Faulty battery. Replace the battery with a new one.
The charging light (A) and reconditioning light (B) flash at one-second intervals:
This may be a contact fault. Check whether there are dust or other particles between the charger and
the lead.
A fuse may have blown. Open the fuse box on the side of the battery and check that everything
works. If not, replace the blown fuse with the spare one stored on the side of the battery cover.
Warning!
Use the indicated fuses only (30A fuse flat) to avoid the risk of the battery catching fire.
Decon Wheel AB
Landerydsvägen
314 22 Hyltebruk
Sweden
Tel + 46 (0) 345-408 80
Fax +46 (0) 345-408 95
www.decon.se
info@decon.se

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents