Installing The Jwx-2 - Decon wheel E-MOVE Service Manual

3.2 Installing the E-Move
With the exception of the cabling, the procedure for installing the E-Move in a modular-type wheel-
chair is the same for both left and right sides. Accordingly, the model description given below is
for installation on the left side. Use the same procedure to install on the right.
Required tools:
3
（a）
（f）
（d）
8
4 mm and 5 mm hexagonal wrenches (Allen keys), 24 mm socket, socket wrench, torque
wrench, 22 mm and 24 mm spanners
（b）
（e）
（b）
1
Remove the axle sleeve (a) installed
on the wheelchair.
Remove the existing wheel and axle sleeve (a)
from the side bracket (b) on the wheelchair.
2
Install the axle sleeve (c).
（1） Install the stopper arm (d) and boss (e) on
the wheelchair side bracket (b) and tem-
porarily tighten the bolt (f).