Guarantee And Maintenance - Decon wheel e-move User Manual

GUARANTEE AND MAINTENANCE

Guarantee:
• The battery has a 6-month function guarantee. The machinery has a 1-year guarantee.
Maintenance:
• Do not spray water onto the machinery
• Wipe clean the wheel axles and lubricate them with a little oil.
• Tighten the spokes once a rear.
• Check nuts and screws regularly and tighten them when necessary (this applies to all lose
parts).
• Wipe the frame with a soft cloth and detergent.
• Check over the chair once a week and check that no cracks or other damage have occurred.
If any damage occurs, please contact Decon Wheel immediately.
• An authorised person or Decon Wheel must carry out all technical servicing.
• Only original components or those, which meet Decon Wheels specifications, are to be used.
Battery
Before charging
When you want to charge the battery, select a location, which is:
• Indoors and well ventilated
• 0-40°C
• A level and stable surface
Warning!
It is important that the temperature is 0-40°C. Do not place the charger near a cooker or in direct
sunlight.
The charger will not start if the temperature is too high or too low.
Do not charge the battery where there is a risk of the equipment getting wet. Risk of short-circuiting
and electric shocks.
Do not place anything onto or extremely close to the battery charger when it is charging.
The charger may overheat and stop working.
Ensure that no children or pets touch the charger. Risk of electric shocks or damage to the
equipment.
Do not use any other type of charger. Only use the one enclosed in the delivery.
Decon Wheel AB
Landerydsvägen
314 22 Hyltebruk
Sweden
Tel + 46 (0) 345-408 80
Fax +46 (0) 345-408 95
www.decon.se
info@decon.se