Checking The Residual Capacity Of The Battery And Installing The Battery On The Wheelchair - Decon wheel e-drive plus User Manual

3.3. Checking the Residual Capacity of the Battery and
Installing the Battery on the Wheelchair
(1) Press the indicator switch to check the residual capac-
ity of the battery. The residual capacity of the battery
will be displayed on the capacity indicator lamps.
(2) Check the contacts to ensure that they are not dirty
or rusted. If the contacts are dirty or severely rusted,
the wheelchair may be rendered immobile.
(3) Install the battery on the wheelchair.
< How to install a nickel metal hydride (Ni-MH) battery>
Turn off the power switch
< How to install a lithium ion (Li-ion 00) battery>
Turn off the power switch.
Do not drop or apply an impact to the battery.
This may cause the battery to become damaged, overheat, or rupture.
Do not insert the battery if the battery slot is dirty or wet.
This may cause a short circuit and lead to a fire or battery rupture.
38
Insert the battery until it clicks into place.
Insert the battery.
Grip
WARNING
Contacts
Click!
1 Pull the grip down to the
side.
2 Firmly insert the battery.