Installing E-Drive - Decon wheel e-drive User Manual

Installing the e-drive
Your local dealer shall have mounted all necessary components on your wheelchair. If you receive the
chair without the wheels mounted on the chair, follow the instructions as you see below. If the
wheels does not fit on the chair, contact your local dealer.
1. Start fitting e-drive to your wheelchair. The wheels have a quick release axle (QR axle).
Press the button and assembly the wheel on the chair. Picture 1
2. When installing the wheels you need to lift the wheelchair up a little with your hand. Then
insert the QR axle . It is very important that the axle be pressed in far enough; otherwise the
QR axle may come off. Picture 2 and 3
Picture 1 Picture 2
Picture 3
3