Table of Contents
Advertisement
[Date and Time] Setting Date and Time
The following can be set here.
• Current Date and Time
The date and time set in the camera is shown.
• Setting
Select the date and time setting method, time
zone and daylight saving time for the camera.
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
(1) [Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast],
[Synchronize with computer time].
(2) [Date], [Time]
Set the following according to the selection made in
[Setting Method].
[Set manually]
Set the desired date and time. The date is set by <year/
month/day>, and the time in 24-hour format in the
order <hour:minute:second> (two digits for month,
day and time).
Example: To specify 1:23:04 pm, 23 August 2012,
enter "2012/08/23" and "13:23:04".
[Synchronize with NTP server]
The camera will synchronize with the NTP server
time.
If [Auto-Setting of NTP Server] is enabled, camera
time is automatically synchronized with the time of
the NTP server at the address obtained from the
DHCP server. In order to enable this setting, you
must change [Network] > [IPv4 Address Setting
Method] to [Auto (DHCP)] (p. 47).
To select a particular NTP server, disable [Auto-
Setting of NTP Server], and then enter the IP
address or host name of the NTP server in [NTP
Server].
50
[Synchronize with NTP broadcast]
The camera will synchronize with the NTP server
time. The camera will synchronize time with NTP
broadcasts received from the NTP server.
[Synchronize with computer time]
The camera will synchronize with the date and time
of the computer currently accessing the camera.
The time zone will also be selected automatically.
(3) [Time Zone]
Select from the list the appropriate time difference
from the Greenwich Mean Time.
(4) [Daylight Saving Time]
Select [Enable] to automatically adjust the daylight
saving time according to the time zone or [Disable]
not to automatically adjust the daylight saving time.
Note
• If [Synchronize with computer time] is selected, after clicking
[Apply], [Setting Method] will change to [Set manually].
• If [Synchronize with computer time] is selected, the city at the
top of the list in the same time zone offset is selected. If the
wrong time zone is selected, set the correct time zone
manually.
• If [Synchronize with NTP server] is selected and the IP address
of the NTP server is incorrect or a connection with the NTP
server cannot otherwise be established, the date and time will
not be changed.
• The camera's NTP broadcast mode does not support IPv6.
• If the [Time Zone] setting is changed, the date and time
display will update automatically according to the specified
time zone.
Advertisement
Table of Contents
