Table of Contents
Advertisement
4
4.1
Making Basic Copies
The procedure for making basic copies is described below.
1
Position the document(s) to be copied.
❍
For details, refer to "6 Original Documents".
2
Check that the [Copy] key
indicator is lit in green and that the
copier is in Copy mode.
❍
The Basics screen appears in
the touch panel.
3
Specify any necessary copy settings.
❍
To change the paper size (paper drawer), touch [Paper].
For details, refer to "Selecting the Paper Setting" (page 5-22).
❍
To change the zoom ratio, touch [Zoom].
For details, refer to "Specifying a Zoom Setting" (page 7-14).
❍
To sort, staple or punch holes in the copies, touch [Finishing].
For details, refer to "Specifying Finishing Settings" (page 7-2).
To copy a book or copy while using less paper, touch [Orig. Ö Copy].
❍
For details, refer to "Selecting the Orig. Ö Copy Settings" (page 7-18).
❍
To change the density of the copy, touch [Density].
For details, refer to "Selecting a Copy Density" (page 7-33).
4-2
4.1 Making Basic Copies
Di2010/Di2510/Di3010/Di3510
Advertisement
Table of Contents
