Panasonic AG-DVX200PJ Operating Instructions Manual page 85

Level Gauge
≥ Register "Level Gauge" to a USER button.
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫ To correct the tilt
(Horizontal direction)
When correcting the leftward tilt
≥ The horizontal tilt display A and vertical tilt display B appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥ The maximum tilt display angles are approximately 45 o in horizontal direction and 10 o in vertical
direction.
≥ The electronic level does not affect the actual recorded images.
≥ This function is not available in the following cases:
j During Freeze Frame
j When color bars are displayed.
≥ If [SELF SHOOT] (l
record yourself.
≥ Even when the tilt is in the corrected state, an error of approximately 1 o may occur.
≥ In the following cases, the electronic level may not be displayed correctly:
j When moving this unit
j When pointing this unit up or down at an angle closer to perpendicular
Background
≥ Register "Background" to a USER button.
When [2 SLOTS FUNC.] is set to [BACKGROUND], you can start/stop background recording.
≥ When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT]
(l 32), [SD CARD 2] will be used for background recording.
The following instructions assume that the recording destination of motion pictures is set to [SD
CARD 1].
≥ Set [2 SLOTS FUNC.] to [BACKGROUND].
is displayed for SD CARD 2.
BACKGR
(To start background recording)
Press the applicable USER button or the applicable USER button icon.
≥ Background recording will start on the SD card in SD CARD 2. (
(To stop background recording)
While motion picture recording to [SD CARD 1] is stopped, press and hold the
applicable USER button or the USER button icon.

(l 81)
(l 95)
175) is set to [MIRROR], the electronic level will not be displayed when you
(l 74)
(Vertical direction)


When correcting the downward tilt
(l 74)
(l 159)
- 85 -
will be displayed in red.)
BACKGR