Panasonic AG-DVX200PJ Operating Instructions Manual page 83

≥ Area Function is not possible in following cases:
j In Variable Frame Rate Mode
j When a remote control (commercially-available) is connected
≥ Area mode is canceled in following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j When you set [REC FORMAT] to [4K 2160/24.00p 100M]
j When you set [OUTPUT FORMAT] to [4K 2160/24.00p]
j When the setting of [ASPECT CONVERT] is changed
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
≥ When using Area Mode, even if you set [ZEBRA] to [MARKER], the luminance display frame will
not be displayed. (l
In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or
[FOCUS/IRIS].
Focus Transition
≥ Register "Focus Transition" to a USER button.
≥ Switch to Manual Focus Mode.
With Focus Transition, you can move the current focus position to a pre-registered focus position.
(l 52)
Capture
≥ Register "Capture" to a USER button.
You can record still pictures or create still pictures from recorded motion pictures.
EVF/LCD detail
≥ Register "EVF/LCD detail" to a USER button.
[EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image
displayed on the LCD monitor or the viewfinder.
≥ These settings will not affect the images actually recorded.
(l 91)
88, 155)
(l 44)
(l
(l
(l 142)
(l 147)
(l 148)
(l 74)
74)
(l 74)
(l 45)
- 83 -
113)
(l
(l 34, 106)
122)