Digital Zoom - Panasonic AG-DVX200PJ Operating Instructions Manual

Digital Zoom

≥ Register "Digital Zoom" to a USER button.
≥ Set [OUTPUT BITS] to [4:2:2(8bit)].
Press USER button or touch USER button icon in the recording screen.
≥ When [DIGITAL ZOOM] is set to [k2], [k5] or [k10], Digital Zoom will be turned on/off each time
you press the button.
≥ When [DIGITAL ZOOM] is set to [TOGGLE], the zoom magnification will change each time you
press the button.
2k # 5k # 10k # Setting canceled
∫ To change the zoom magnification of Digital Zoom
The zoom magnification of Digital Zoom varies depending on the [DIGITAL ZOOM] setting.
MENU
: [SW SETUP] # [DIGITAL ZOOM] # desired setting
[k2]:
[k5]:
[k10]:
[TOGGLE]:
≥ When using Digital Zoom, the larger you set the zoom magnification, the lower the picture quality
becomes.
≥ Digital Zoom is not possible in following cases:
j When [OUTPUT BITS] is set to [4:2:2(10bit)]
j During Freeze Frame
j When using Area Mode
j In Variable Frame Rate Mode
j During the Interval Recording
≥ Digital zoom is canceled in following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
Histogram
≥ Register "Histogram" to a USER button.
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is
displayed. It is possible to determine the exposure of the whole image by looking at the distribution
in the graph.
∫ To move a histogram
You can move a histogram by touching and holding the
histogram display A. Slide the display while touching it to
move it to the desired display location.
(l 31)
Sets the zoom magnification to 2k.
Sets the zoom magnification to 5k.
Sets the zoom magnification to 10k.
Changes the zoom magnification each time you press the applicable
USER button.
(l 81)
(l 82)
(l 91)
(l 162)
(l
- 79 -
(l 74)
74)
(l 122)
