Panasonic AG-DVX200PJ Operating Instructions Manual page 161

≥ [2 SLOTS FUNC.] is not available when [OUTPUT BITS] is set to [4:2:2(10bit)].
(Relay recording)
≥ Destination to record still pictures will be switched to other SD card after performing the relay
recording. In addition, a message about the remaining card capacity will be displayed. Replace
the SD card that ran out of space or set [2 SLOTS FUNC.] to [OFF].
(Simultaneous recording)
≥ Simultaneous recording will not be performed for still pictures.
≥ When performing simultaneous recording, even in the case where an error has occurred in one of
the SD cards and recording has stopped, recording can be continued using the other SD card.
≥ When one of the media reaches its maximum recording time, the simultaneous recording stops.
(Background recording)
≥ An alert sound is not emitted for background recording.
≥ If you record still pictures, their picture quality will differ from that during normal still picture
recording.
≥ Background recording stops in the following cases:
j When you have turned off this unit
j When the SD card being used as a background recording destination runs out of space
≥ If the SD card being used as a background recording destination runs out of space during motion
picture recording, background recording does not restart automatically even if you replace the SD
card.
(Dual codec recording)
≥ Main recording does not stop even if an error occurs in the memory card used for sub recording.
If an error occurs in the memory card used for main recording, the recording stops.
[DUAL CODEC REC]
This sets the sub recording scene settings for dual codec recording.
≥ For information on dual codec recording, refer to page 160.
≥ Set [OUTPUT BITS] to [4:2:2(8bit)].
≥ Set [REC FORMAT] to a setting with a size of UHD (3840k2160).
[FHD 50Mbps]:
[FHD 8Mbps]:
≥ Sub recording scenes will be recorded with the following settings:
j Recording is performed with a size setting of FHD (1920k1080)
j When [FHD 50Mbps] is selected, the [REC MODE] setting selected for sub recording will be
the same as the setting selected for main recording (MOV/MP4).
j Recording is performed at the same frame rate as that of the [REC FORMAT] setting for main
recording.
(l
Performs recording at a bit rate of 50Mbps. Scenes can be saved in either
MOV or MP4 format.
Performs recording at a bit rate of 8Mbps. Scenes can be saved in MOV
format.
31)
- 161 -
(l 142)