Panasonic AG-DVX200PJ Operating Instructions Manual page 152

[BLUR AMPLITUDE]
[1]/[2]/[3]/[4]/[5]
This sets the blur amplitude of the Image Stabilizer during recording.
[BLUR FREQUENCY]
[1]/[2]/[3]
This sets the blur frequency of the Image Stabilizer.
[ATW SET]
You can assign ATW to the WHITE BAL switch.
[OFF]: Does not assign ATW to the WHITE BAL switch.
[Ach]: Sets the White Balance mode to ATW when the WHITE BAL switch is set to A.
[Bch]: Sets the White Balance mode to ATW when the WHITE BAL switch is set to B.
[PRST]: Sets the White Balance mode to ATW when the WHITE BAL switch is set to
PRST.
[ATW SPEED]
[FAST]/[NORMAL]/[SLOW]
This sets the control speed for ATW.
[ATW TARGET R]
This fine-adjusts the intensity of red.
≥ This function's default setting is "0".
[ATW TARGET B]
This fine-adjusts the intensity of blue.
≥ This function's default setting is "0".
(l 43)
(l 57)
(l 57)
(l 57)
- 152 -
(l 43)