Time Stamp - Panasonic AG-DVX200PJ Operating Instructions Manual

[INFRARED REC]
[ON]/[OFF]
Selecting [ON] enables Infrared Recording Mode, allowing you to record images in the dark.
[FOCUS TRANSITION]
≥ Switch to Manual Focus.
[SET][OFF]
You can register a focus position to Focus Transition.
[FOCUS TRANSITION TIME]
[DIRECT]/[2-15 SEC.]/[20 SEC.]/[30 SEC.]/[45 SEC.]/[60 SEC.]/[90 SEC.]
You can set the length of time in which the focus will shift during Focus Transition.
≥ This function's default setting is 2 seconds.
[FOCUS TRANSITION REC]
[1]/[2]/[3]/[OFF]
You can start recording and Focus Transition simultaneously.
[FOCUS TRANSITION WAIT]
[0 SEC.]/[5 SEC.]/[10 SEC.]
You can set the length of time before Focus Transition starts.

[TIME STAMP]

≥ Set [OUTPUT BITS] to [4:2:2(8bit)].
[ON]/[OFF]
You can stamp the date and time of recording on the images you record.
≥ appears on the screen.
≥ The display mode and format of the date and time of recording to be stamped vary depending on
the settings for [DATE/TIME] and [DATE FORMAT].
≥ The month of the date and time of recording is recorded in English.
(l 44)
(l 31)
- 164 -
(l 52)
(l 54)
(l 55)
(l 173)
(l 84)
(l 54)