Watching The Captured Images On Tv - Minolta 2330 Instruction Manual

WATCHING THE CAPTURED IMAGES ON TV

By connecting this camera to your TV with the supplied video cable, you can
watch the captured images on TV.
1
Confirm that the video out signal from the video-out terminal is set to
NTSC or PAL according to the colour system in your country. (see page
122).
2 Turn off the power of the this camera and TV.
3
Open the terminal cover on the left side of the camera and connect the
mini plug of the supplied video cable to the video-out terminal of the
camera.
• The LCD monitor is turned off.
4
Connect the other side of the video cable to the video input terminal on
TV.
5 Turn on the power of TV.
6
Rotate the function dial to
7
Slide the power switch to turn on the camera.
8
Switch the video input of TV according to the terminal to which the
video cable is connected.
• The images recorded in the CF card can be displayed both on the LCD monitor and
TV.
9
You can watch the images in the various play modes performing the
procedure described on pages from 71 to 78.
• The images can be played back in the slide show mode (see page 79), etc.
.
147