SETTING THE DATE AND TIME
STYLE
YYYY/MM/DD
DATE
2000/09/30
TIME
17:33
: SELECT
: ADJUST
ENTER:
SET
STYLE
YYYY/MM/DD
DATE
2000/09/30
TIME
17:33
: SELECT
: ADJUST
ENTER:
SET
* After replacing the batteries, check that the built-in clock (date and time) functions
correctly.
If the AC adapter is not used and the battery-chamber door is open for more than 5
minutes, the built-in clock may delay or be reset to the default setting. In this case, set
the date and time again.
7
Press the
or
correct the date and time.
When you press and hold the
key, the value goes fastforward or
fastbackward.
• The value for year can be specified from
2000 to 2099.
• When other values need to be changed,
repeat step [6] and [7].
• If [TIME] is highlighted and the ENTER
button is pressed on step 3, the display to
specify the date and time appears as
shown in the figure. To correct the time,
repeat step [6] and [7].
8
After the date and time is specified
(corrected), press the ENTER button.
• The built-in clock of this camera starts
functioning. The LCD monitor returns to the
setup mode menu.
119
key to specify or
or