Table of Contents
Advertisement
CONNECTING TO THE PERSONAL COMPUTER
5
Open the terminal cover and connect
one side of the supplied USB cable to
the USB connector of this camera.
• As the both sides of USB connector are the
same shape, you can connect either side of
the USB connector.
• Connect the USB connector securely.
Otherwise, the operation cannot be
performed correctly.
6
Connect the other side of the supplied
USB cable to the USB port of the
computer.
• Connect the USB connector securely.
Otherwise, the operation cannot be
performed correctly.
• If you connect the camera to the computer
via the USB hub, the operation may not be
performed correctly depending on the
condition of other USB equipment or the
USB hub. We recommend you to connect to
the USB port of the computer directly.
When using Windows
Second Edition and connecting this cam-
era to the computer with the USB cable,
"Add New Hardware Wizard" dialog box
appears as shown in the figure. Install
the driver software by following the indi-
cation of the dialog box (refer to the pro-
cedure described on the following
pages).
133
®
98/Windows
®
98
Advertisement
Table of Contents
