Table of Contents
Advertisement
INSERTING/REMOVING
THE COMPACT FLASH (CF) CARD
Be sure to turn off the power of the camera when inserting or removing the
CF card into or from the camera. Otherwise, the data in the card may be lost
or the card may be damaged.
If you insert or remove the CF card when the camera is turned on, re-format
the CF card after transferring the data from the card to your computer if the
data is safe.
INSERTING THE CF CARD
1
Open the card-slot door as shown in
the figure.
2
Insert the CF card into the card slot.
• Position the flat edge side of the card
towards the camera lens and insert the card
with the signal part facing down until the
card stops.
• Insert the card straight. Do not insert it on
the angle.
• If the card stops halfway, check the
direction of the card. Forcing the card into
the slot may damage the card or the
camera.
28
Advertisement
Table of Contents
