Minolta 2330 Instruction Manual page 97

SPECIFYING THE PRINT SETTINGS WITH THE DPOF
0
0
QUANTITY
CHANGE IMAGE
ENTER TO SET
3
After confirming that [STD.] is high-
lighted, press the ENTER button.
• The display to specify the number to be
0 0
0
0
4
Press
to be printed.
• When the image to be printed is selected,
• When the sixth frame is selected (when the
• When the seventh frame is selected (when
97
printed appears on the LCD monitor.
or key to select the image
the number to be printed is highlighted.
number to be printed is highlighted) and the
key is pressed, the following 6 frames
are displayed.
the number to be printed is highlighted) and
the key is pressed, the preceding 6
frames are displayed.