Set Lengths For Code 39 - Motorola DS3578 Product Reference Manual

13 - 32 DS3578 With FIPS Digital Scanner Product Reference Guide

Set Lengths for Code 39

Parameter # L1 = 12h, L2 = 13h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 39 to any length, one or two discrete lengths, or lengths within a specific
range. If Code 39 Full ASCII is enabled, Length Within a Range or Any Length are the preferred options.
NOTE When setting lengths for different bar code types by scanning single digit numbers, single digit numbers
must always be preceded by a leading zero.
•
One Discrete Length - Select this option to decode only Code 39 symbols containing a selected length.
Select the length using the numeric bar codes in
only Code 39 symbols with 14 characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4.
To correct an error or change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Code 39 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only those Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or change the selection, scan
Cancel on page
•
Length Within Range - Select this option to decode a Code 39 symbol with a specific length range.
Select lengths using numeric bar codes in
39 symbols containing between 4 and 12 characters, first scan Code 39 - Length Within Range. Then
scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error or
change the selection, scan
•
Any Length - Select this option to decode Code 39 symbols containing any number of characters within the
digital scanner capability.
E-3.
Cancel on page
Appendix E, Numeric Bar
Cancel on page E-3.
Appendix E, Numeric Bar
Appendix E, Numeric Bar Codes.
E-3.
Codes. For example, to decode
Codes. For
For example, to decode Code