Upc/Ean/Jan Supplemental Redundancy - Motorola DS3578 Product Reference Manual

13 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide

UPC/EAN/JAN Supplemental Redundancy

Parameter # 50h
With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a
symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or above
is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals, and the
autodiscriminate option is selected. The default is set at 10.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in
Numeric Bar Codes. Single digit numbers must have a leading zero. To correct an error or change a selection,
scan Cancel on page
UPC/EAN/JAN Supplemental Redundancy
E-3.
Appendix E,