Motorola DS3578 Product Reference Manual page 363

Modifier Characters (Continued)
Table B-3
Code Type Option Value
MSI 0
1
Example: An MSI bar code 4123, with a single check digit checked, is transmitted as
]M14123.
D 2 of 5 0
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
UPC/EAN 0
1
2
3
4
Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905.
Bookland EAN 0
Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X.
ISSN EAN 0
Example: An ISSN EAN bar code 123456789X is transmitted as ]X0123456789X
Code 11 0
1
3
Example: A Code 11 bar code 12345678901, with one check digit enabled and transmit
check digit enabled, is transmitted as ]H012345678901.
GS1 DataBar
Family
Example: A GS1 DataBar-14 bar code 0110012345678902 is transmitted as
]e00110012345678902.
Check digits are sent.
No check digit is sent.
No options specified at this time. Always transmit 0.
Standard packet in full EAN country code format, which is 13 digits for
UPC-A, UPC-E, and EAN-13 (not including supplemental data).
Two-digit supplement data only.
Five-digit supplement data only.
Combined data packet comprising 13 digits from a UPC-A, UPC-E, or
EAN-13 symbol and 2 or 5 digits from a supplemental symbol.
EAN-8 data packet.
No options specified at this time. Always transmit 0.
No options specified at this time. Always transmit 0.
Single check digit
Two check digits
Check characters validated but not transmitted.
No option specified at this time. Always transmit 0. GS1 DataBar-14 and
GS1 DataBar Limited transmit with an Application Identifier "01".
Note: In GS1-128 emulation mode, GS1 DataBar is transmitted using
Code 128 rules (i.e., ]C1).
Programming Reference
Option
B - 5