The Toolbar Buttons; Get Status; Read Configuration; Write Configuration - Minicom Supervisor Phantom Operating Manual

The toolbar buttons

Get Status

If for whatever reason there is a break in communication between the Control software and the Phantom
system, click
updates the status before every switching.

Read Configuration

To see the current settings of the entire Phantom system (names, scan settings etc.) click
All current settings are received. You view the computer settings from the Control window and other settings
from the Edit menu – discussed below.

Write Configuration

With the Control software you can make changes to all OSD settings. You can then save these configurations
in a file to use in the future by selecting Save or Save As from the File menu.
Note! Save or Save As will have no affect on the OSD.
To change the OSD settings you must press
menu after making changes. The changes will then be sent to the Phantom Manager, and the OSD will reflect
these changes.

Renaming a computer

To rename a computer:
1. Type the new name in the box below the computer icon.
2. Click
Or
Click Save or Save As from the File menu to save the change in a file and not alter the OSD names.

The Edit menu

You can edit all OSD fields.
Edit the following from the Edit menu.
•
Logo
•
Passwords
•
Settings
Operating the Phantom system with the Control software
to get the current status of the computers in system. The system automatically
to send the new name to the Phantom system.
4-5
or choose Write Configuration from the File
.