Hard Drive - HP ENVY x360 m6 Convertible Maintenance And Service Manual

Hard drive

NOTE: The Hard Drive Hardware Kit, spare part number 808238-001, includes the hard drive bracket and
hard drive connector cable.
Description
1-TB, 5400-rpm, 7 mm
750 GB, 5400 rpm hard drive, 7 mm
500-GB, 5400-rpm, 7 mm, hybrid 8 GB SSD
500-GB, 5400-rpm, 7 mm
Hard Drive Hardware Kit (includes hard drive bracket and connector cable)
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
5. Disconnect the battery.
Remove the hard drive:
1. Disconnect the hard drive connector cable (1) from the system board.
Top cover on page 26).
Spare part number
762990-005
752099-005
732000-005
778186-005
808238-001
Component replacement procedures 29