Memory Module - HP ENVY x360 m6 Convertible Maintenance And Service Manual

Memory module

Description
8-GB (DDR3L-1600)
4-GB (DDR3L-1600)
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
5. Remove the system board (see
To remove a memory module:
1. Position the system board upside-down.
2. Press in on either side of the memory cover close to the edge of the system board (1).
3. Lift the cover off the system board (2).
4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
Top cover on page 26).
System board on page 38).
Component replacement procedures
Spare part number
693374-005
691740-005
41