Table of Contents
Advertisement
78
1-1. For safe use
WARNING
■
When installing a child restraint system
●
When installing a child restraint system on the center second and third
seat, adjust both seat cushions to the same position (second seat only)
and align both seatbacks at the same angle. The seatbacks must be
adjusted to the same angle. Otherwise, the child restraint system cannot
be securely restrained and this may cause death or serious injury in the
event of sudden braking, sudden swerving or an accident.
●
When using the LATCH anchors for a child restraint system, move the seat
as far back as possible (second seat only), with the seatback close to the
child restraint system.
●
When a booster seat is installed, always ensure that the shoulder belt is
positioned across the center of the child's shoulder. The belt should be
kept away from the child's neck, but not so that it could fall off the child's
shoulder. Failing to do so may result in death or serious injury in the event
of sudden braking, sudden swerving or an accident.
●
Ensure that the belt and plate are securely locked and the seat belt is not
twisted.
●
Shake the child restraint system left and right, and forward and backward
to ensure that it has been securely installed.
●
After securing a child restraint system, never adjust the seat.
●
Follow all installation instructions provided by the child restraint system
manufacturer.
●
When using the right-hand second and
third seat for the child restraint system,
do not sit in the center second and third
seat.
Seat
impaired, such as being positioned
overly high or loose-fitting, which may
result in death or serious injury in the
event of sudden braking, sudden swerv-
ing or an accident.
HIGHLANDER_HV_U (OM48F02U)
belt
function
may
be
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
