■
The pre-collision system is operational when
The PCS OFF switch is not pressed and the following conditions are met:
●
Pre-collision warning:
• Vehicle speed is greater than about 10 mph (15 km/h).
• The speed at which your vehicle is approaching the obstacle or the vehi-
cle running ahead of you is greater than about 10 mph (15 km/h).
●
Pre-collision brake assist:
• The VSC OFF switch is not pressed.
• Vehicle speed is greater than about 19 mph (30 km/h).
• The speed at which your vehicle is approaching the obstacle or the vehi-
cle running ahead of you is greater than about 19 mph (30 km/h).
• The brake pedal is depressed.
●
Pre-collision braking:
• The VSC OFF switch is not pressed.
• Vehicle speed is greater than about 10 mph (15 km/h).
• The speed at which your vehicle is approaching the obstacle or the vehi-
cle running ahead of you is greater than about 10 mph (15 km/h).
■
Conditions that may trigger the system even if there is no danger of a
collision
●
When there is an object by the roadside at the entrance to a curve
●
When passing an oncoming vehicle on a curve
●
When driving over a narrow iron bridge
●
When there is a metal object on the road surface
●
When driving on an uneven road surface
●
When passing an oncoming vehicle on a left-turn
●
When your vehicle rapidly closes on the vehicle in front
●
When a grade separation/interchange, sign, billboard, or other structure
appears to be directly in the vehicle's line of travel
●
When there is a metal plate in the road in front of the vehicle on a downhill
slope
●
When climbing a steep hill causes an overhead billboard or other metallic
structure to appear directly in the vehicle's line of travel
●
When driving under an overpass
●
When an extreme change in vehicle height occurs
●
When passing through certain toll gates
●
When passing through a tunnel
●
When the radar sensor moves off position due to its surrounding area being
subjected to a strong impact
When the system is activated in the situations described above, there is also
a possibility that the brakes will be applied with a force greater than normal.
HIGHLANDER_HV_U (OM48F02U)
4-5. Using the driving support systems
I n f o r ma t i o n P r o v i d e d b y :
299
4