Toyota Highlander Hybrid 2015 Owner's Manual page 132

132
3-2. Opening, closing and locking the doors
■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
1
Turn the power switch off.
2
When the indicator light on the key surface is not on, press and hold
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information
display
Mono-
Color
chrome
display
display
For vehicles with an alarm: To prevent unintended triggering of the alarm,
unlock the doors using the wireless remote control and open and close a door
once after the settings have been changed. (If a door is not opened within 60
seconds after
will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (P. 94)
HIGHLANDER_HV_U (OM48F02U)
for approximately 5 seconds while pressing and holding
2
.)
Unlocking function
Holding the driver's door
handle unlocks only the
driver's door.
Holding a passenger's door
handle unlocks all
doors.
Holding a door handle
unlocks all the doors.
is pressed, the doors will be locked again and the alarm
I n f o r ma t i o n P r o v i d e d b y :
Beep
Exterior: Beeps 3
times
Interior: Pings once
the
Exterior: Beeps twice
Interior: Pings once
,