Table of Contents
Advertisement
230
4-2. Driving procedures
Stopping the hybrid system
1
Stop the vehicle.
2
Shift the shift lever to P.
3
Set the parking brake. (P. 243)
4
Press the power switch.
5
Release the brake pedal and check that "ACCESSORY" or
"IGNITION ON" on the multi-information display is off.
Changing power switch modes
Modes can be changed by pressing the power switch with brake pedal
released. (The mode changes each time the switch is pressed.)
*
1
Off
The emergency flashers can be
used.
The multi-information display will
not be displayed.
2
ACCESSORY mode
Some electrical components such
as the power outlet can be used.
"ACCESSORY" will be displayed
on the multi-information display.
3
ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed on the multi-information display.
*
: If the shift lever is in a position other than P when turning off the hybrid sys-
tem, the power switch will be turned to ACCESSORY mode, not to off.
HIGHLANDER_HV_U (OM48F02U)
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
