Table of Contents
Advertisement
272
4-5. Using the driving support systems
Changing the vehicle-to-vehicle distance
Pressing the button changes the
vehicle-to-vehicle distance as fol-
lows:
1
Long
2
Medium
3
Short
The vehicle-to-vehicle distance is
set automatically to long mode
when the power switch is turned to
ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be
displayed.
Vehicle-to-vehicle distance settings
Select a distance from the table below. Note that the distances shown
correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle
distance increases/decreases in accordance with vehicle speed.
Distance options
Medium
HIGHLANDER_HV_U (OM48F02U)
Preceding vehicle
mark
Long
Short
I n f o r ma t i o n P r o v i d e d b y :
Vehicle-to-vehicle distance
Approximately 160 ft. (50 m)
Approximately 130 ft. (40 m)
Approximately 100 ft. (30 m)
Advertisement
Table of Contents
