Table of Contents
Advertisement
NOTICE
■
To prevent back door closer malfunction
Do not apply excessive force to the back door while the back door closer is
operating.
■
To prevent damage to the power back door
●
Make sure that there is no ice between the back door and frame that
would prevent movement of the back door. Operating the power back door
when excessive load is present on the back door may cause a malfunc-
tion.
●
Do not apply excessive force to the back door while the power back door
is operating.
●
Take care not to damage the sensors (installed on the right and left edges
of the power back door) with a knife or other sharp object. If the sensor is
disconnected, the power back door will not close automatically.
HIGHLANDER_HV_U (OM48F02U)
3-2. Opening, closing and locking the doors
I n f o r ma t i o n P r o v i d e d b y :
143
3
Advertisement
Table of Contents
