Driving Procedures; Power (Ignition) Switch - Toyota Highlander Hybrid 2015 Owner's Manual

Power (ignition) switch

Performing the following operations when carrying the elec-
tronic key on your person starts the hybrid system or changes
power switch modes.
Starting the hybrid system
1
Check that the parking brake is set.
2
Check that the shift lever is set in P.
3
Firmly depress the brake pedal.
Vehicles with monochrome display:
will be displayed on the multi-information display.
If it is not displayed, the hybrid system cannot be started.
Vehicles with color display:
and a message will be displayed on the multi-information display.
If it is not displayed, the hybrid system cannot be started.
4
Press the power switch.
Continue depressing the brake
pedal until the hybrid system is
completely started.
The hybrid system can be started
from any power switch mode.
5
Check that the "READY" indicator is on.
The vehicle will not move when the "READY" indicator is off.
HIGHLANDER_HV_U (OM48F02U)

4-2. Driving procedures

I n f o r ma t i o n P r o v i d e d b y :
229
4