Table of Contents
Advertisement
414
6-3. Do-it-yourself maintenance
■
How to initialize the tire pressure warning system
1
Park the vehicle in a safe place and turn the power switch to off.
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (P. 536)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Turn the power switch to the ON mode.
4
Press and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
5
Wait for a few minutes with the power switch in ON mode and
then turn the power switch off.
HIGHLANDER_HV_U (OM48F02U)
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
