Cook's essentials K42027 Instruction Manual page 13

Table of Contents

Closing the Lid: Make sure the Rubber Seal Ring (18) is fitted properly onto the

metal ring on the inside of the lid (2). Observe the Rubber Seal Ring (18) inside the

lid (2) and ensure that it is fitted on the outer part of the metal ring all the way

around the metal ring. (Caution: If the rubber seal ring is damaged, do not use the

pressure cooker. Contact Customer Service to repair or replace the rubber seal ring

(18).)

Lift the lid (2) from the rested position. Close the lid (2). Hold the handle (1) and

turn it Counter-Clockwise to the "LOCKED" position. (A clamping sound can be

heard See Figures 16-18).

Note: To ensure you are properly closing the lid (2), please make sure the pressure limiting

valve (3) is on your left side when you are facing the front of the pressure cooker (when

facing the control panel (10).

Adjust the Pressure Limiting Valve (3) to the "Airtight" position , and ensure that the

Float Valve (5) sinks.

When adjusting the Pressure Limiting Valve (3) to either the "Airtight" or the

"Exhaust" positions, line up the marking on the Pressure Limiting

Valve (3) with the arrow on the Handle (1) as shown in Figures 19 and 20.

Table of Contents

Show Quick Links

Table of Contents