Husqvarna TE 250R 2013 Operation And Maintenance page 49

HEADLAMP BULBS REPLACEMENT (TE)
To gain access to the healamp bulbs, proceede as follows:
- remove the upper fastening screw of the the headlamp carrier to
the instrument panuel support (A);
- push forward the headlamp carrier (B) and pull it towards the
high (C) in order to uncouple from the two lower supports.
C
1
B
EN - 48 SPECIFICATIONS - OPERATION - MAINTENANCE
- remove the headlamp fairing (1);
- disconnect the connector (2);
- slide off the rubber boot (3);
- release the clip (4) and remove the bulb (5).
To replace the parking light bulb (6) extract it from the inside
cover.
After replacement, reverse operations for reassembly.
A
3
6
TAIL LIGHT (TE)
The tail light is a LED light; Replace it when it does not function.
2
4
5