Husqvarna TE 250R 2013 Operation And Maintenance page 13

DIGITAL INSTRUMENT, WARNING LIGHTS (TE)
The motorcycle is equipped with a digital instrument; on
the instrument are located 3 warning lights too: high beam,
blinkers and fuel reserve.
1- BLUE warning light "HIGH BEAM"
2- GREEN warning light "BLINKERS"
3- ORANGE warning light "Fuel reserve"
The dashboard is activated only after the engine has been
started.
NOTES
- Every time the engine is started, the dashboard shows the SW
version for the first 2 seconds; after the check routine, the
dashboard shows the last planned function.
- A few seconds after the engine has been turned off, the dash-
board is deactivated.
- To select the instrument functions and to set to zero the
functions, use the SCROLL knob (A).
1
2
EN - 12 SPECIFICATIONS - OPERATION - MAINTENANCE
- The instrument functions are the following, as shown below.
1- SPEED / ODO
2- SPEED / CLOCK
3- SPEED / TRIP
4- SPEED / CHRONO
5- SPEED / HOUR COUNTER (H)
1- SPEED / ODO
.................
3
A
1- SPEED (Km/h or mph) / ODO
- SPEED: motorcycle speed- maximum value: 299 Km/h or 299
mph;
- ODO: odometer- maximum value: 99999 km;
To go from Km to Miles or from Miles to Km, visit the nearest
Husqvarna dealer.
A