Husqvarna TE 250R 2013 Operation And Maintenance page 23

COOLANT LEVEL CHECK
Check level (1) in right-hand radiator when engine is cold (place
the motorcycle so that it is perpendicular to the ground). The
coolant should be approximately 10 mm above cells and be-
sides.
The radiator cap (A) is provided of two unlocking positions, the
first being for the previous pressure discharge in the cooling
system.
1
EN - 22 SPECIFICATIONS - OPERATION - MAINTENANCE
WARNING
Avoid removing radiator cap when engine
is hot, as coolant may spout out and cause
scalding.
NOTE
Difficulties may arise in eliminating coolant
from varnished surfaces. If this occurs, wash
off with water.
A