Settings For The Audio; Audio Setup - Sony DAV-IS50 Operating Instructions Manual

• You can select [(1920×1080i)HD
[(1920×1080i)HD] only when you set [HDMI
RESOLUTION] in [HDMI SETUP] to
[1920×1080i].
• If you select [(1920×1080i)HD
[(1920×1080i)HD], next image appears after black
screen.
• HDMI signal will stop momentarily when the system
is loading or unloading a DATA CD or DATA DVD
disc.

Settings for the Audio

[AUDIO SETUP]

AUDIO SETUP
x [S-AIR SETUP]
You can set up the S-AIR setting. For details,
see "Using an S-AIR Product" (page 67).
[ID]
[PAIRING]
Note
• This function is available only when the S-AIR
transmitter (not supplied) is inserted into the S-AIR
main unit.
x [AUTO CALIBRATION]
You can calibrate the appropriate settings
automatically. For details, see "Calibrating the
Appropriate Settings Automatically" (page 81).
88
GB
] or
] or
S-AIR SETUP:
AUTO CALIBRATION:
DIGITAL IN: TV OPT, SAT/CABLE COAX
AUDIO DRC:
TRACK SELECTION:
You can set the ID of the S-AIR
main unit.
You can pair the system and
S-AIR sub unit, such as surround
amplifier or S-AIR receiver.
x [DIGITAL IN]
You can assign a digital sound input
corresponding with the function "TV" and
"SAT/CABLE."
[TV t OPT,
SAT/CABLE t
COAX]
[TV t COAX,
SAT/CABLE t
OPT]
x [AUDIO DRC] (DVD VIDEO only)
You can compress the dynamic range of the
sound track. [AUDIO DRC] is useful for
watching movies at low volume late at night.
OFF
OFF
[OFF]
[STANDARD]
[MAX]
Note
• [AUDIO DRC] works only for Dolby Digital.
x [TRACK SELECTION] (DVD VIDEO only)
You can give the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, DTS, Dolby Digital, or MPEG
audio) are recorded.
[OFF]
[AUTO]
Optical audio input signals are
assigned to "TV" function,
coaxial audio input signals are
assigned to "SAT/CABLE"
function.
Coaxial audio input signals are
assigned to "TV" function, optical
audio input signals are assigned to
"SAT/CABLE" function.
No compression of dynamic
range.
The system reproduces the sound
track with the kind of dynamic
range that the recording engineer
intended.
The system compresses dynamic
range fully.
Off.
The system selects the sound track
automatically according to the
priority.