Settings For The Audio - Sony DAV-DZ310 Operating Instructions Manual

x [VOLUME LIMIT]
When the System Audio Control (page 54) is
activated, loud sound may be output depending
on the volume level of the system. You can
prevent this by limiting the maximum level of
the volume when the System Audio Control
function activates.
[OFF]: Off.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVEL1]: Maximum volume level is set to 20.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [AUDIO RETURN CHANNEL]
This function is available when you connect the
system and TV that is compatible with the Audio
Return Channel function.
[AUTO]: The system can receive the digital
audio signal of your TV via an HDMI cable
automatically.
[Off]: Off.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC C /RGB (HDMI)]
B R
You can select the type of HDMI signal output
from the HDMI OUT jack.
[YC C ]: The system outputs YC
B R
[RGB]: The system outputs RGB signals.
x [AUDIO (HDMI)]
You can select the audio output status from the
HDMI OUT jack.
[OFF]: The system does not output sound from
the HDMI OUT jack.
[ON]: The system outputs audio signals by
converting Dolby Digital, DTS, or 96 kHz/24-
bit PCM signals to 48 kHz/16-bit PCM.
Note
• When you set the function to other than "DVD/CD"
or "USB," the system does not output the sound from
64
GB
Downloaded From TheatreSystem-Manual.com Manuals
the HDMI OUT jack even if you set [AUDIO
(HDMI)] to [ON].
x [JPEG RESOLUTION]
You can select the resolution of JPEG image
files output from the HDMI OUT jack.
[SD
resolution with a black frame.
[HD
with a black frame.
[HD]: The system outputs the HD resolution
without a black frame.
[(1920 × 1080i) HD
full size HD resolution with a black frame.
[(1920 × 1080i) HD]: The system outputs full
size HD resolution without a black frame.
Note
• [JPEG RESOLUTION] is effective only when you
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720 × 480p] or [720 × 480/576p].
• You can select [(1920 × 1080i) HD
1080i) HD] only when you set [HDMI
RESOLUTION] in [HDMI SETUP] to [1920 ×
1080i].
• The HDMI signal will stop momentarily when:
– the system is loading or unloading a DATA CD or
– you connect or remove a USB device.

Settings for the audio

C signals.
B R
x [SPEAKER FORMATION]
Depending on the shape of the room, you may
not be able to install some speakers. For better
surround sound, Sony recommends that first you
decide the position of the speakers.
1
]: The system outputs standard
]: The system outputs HD resolution
]: The system outputs
DATA DVD.
[AUDIO SETUP]
Press C/c to select a setting, then
press .
• [STANDARD]: Select this when you
install all the speakers normally.
• [NO CENTER]: Select this when you
install the front and surround speakers
only.
] or [(1920 ×