Connecting The Tv - Sony DAV-IS50 Operating Instructions Manual

3 Connecting the TV

Use the parts as follows:
• Video cord (1)
To listen to TV sound from the speakers of the system, connect the TV and the system with the audio
cord (not supplied) (A).
For video output to your TV, check the video input jacks of the TV, and select connection method A,
B, or C. Picture quality improves in order from A (standard) to C (HDMI).
When the TV has the digital optical or coaxial output jack, you can improve sound quality by
connecting with the digital cord (B).
Audio cord
(not supplied)
To the AUDIO OUT jacks of
the TV
HDMI** cable
(not supplied)
To the HDMI IN jack
of the TV
* If your TV accepts progressive format signals, use this connection and set the output signal of the system to
progressive format (page 30).
** HDMI (High-Definition Multimedia Interface)
If your TV has the HDMI jack, use this connection and select the type of output signal (page 29).
Digital optical cord
(not supplied)
White
Red
To the digital optical output
jack of the TV
Rear of the control unit
DMPORT
Video cord
(supplied)
To the VIDEO IN jack of
the TV
Component video cord
(not supplied)*
/C R
P R
/C B
P B
To the COMPONENT VIDEO IN
jacks of the TV
Green
Blue
Red
continued
21
GB