Table of Contents
Advertisement
◆Line3 Input
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The picture will not be
clear if this setting does not match the type of
video input signal.
Video/
Inputs video signals or RGB
RGB
signals.
Decoder
Select this when connecting to a
PAY-TV/Canal Plus decoder.
S Video
Inputs S-video signals.
◆Line3 Output
Selects a method of outputting video signals for
the LINE 3/DECODER jack.
Video
Outputs video signals.
S Video
Outputs S-video signals.
Line4 Input
Selects a method of inputting video signals for the
LINE 4 IN jack on the rear panel of the recorder.
Video
Inputs video signals.
S Video
Inputs S-video signals.
Audio Settings (Audio)
The "Audio" setup allows you to adjust the sound
according to the playback conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Audio," and press ENTER.
The "Audio" setup appears with the following
options. The default setting is underlined.
SETUP
Audio DRC :
Settings
CD Priority :
Video
Audio
Features
Speaker
Options
Easy Setup
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC."
Off
No compression of dynamic
range.
Standard
Reproduces the soundtrack with
the dynamic range intended by the
recording engineer.
Max
Maximum compression of
dynamic range.
Note
The Audio DRC function works for Dolby Digital
sources only.
Standard
Auto
,continued
97
Advertisement
Table of Contents
