Sony DAV-IS50 Operating Instructions Manual page 69

9
Press X/x to select the desired ID, then
press .
You can select any ID (A, B, or C).
The confirmation display appears.
10
Press .
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
S-AIR main unit
ID A
ID A
ID A
S-AIR sub unit S-AIR sub unit
Tip
• To confirm the current ID, perform Steps 1 to 7
above. When you pair the S-AIR main unit with the
S-AIR sub unit (page 70), [(PAIRING)] appears
beside ID on the display for selecting ID.
To set the ID of the surround
amplifier (not supplied)
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver (not supplied)
Refer to the operating instructions of the S-AIR
receiver.
Note
• It is easy to set the same ID for the S-AIR main unit
and S-AIR sub unit to establish sound transmission.
However, neighbours may also receive your system's
sound if IDs are the same, or you may receive the
sound from neighbours. To prevent this, you can
identify the S-AIR main unit with a specific S-AIR
sub unit by performing the pairing operation
(page 70).
Other S-AIR main
unit
ID B
ID B
S-AIR sub unit
Enjoying the system's sound
in another room
For the S-AIR receiver (not supplied)
You can enjoy the system's sound by using the
S-AIR receiver. The S-AIR receiver can be
installed anywhere, regardless of the location of
the S-AIR main unit, for enjoying the system's
sound in another room.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1
Set the ID of the S-AIR receiver to that
of the S-AIR main unit.
• To set the ID of the S-AIR main unit, see
"To set the ID of the S-AIR main unit"
(page 68).
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
Note
• When you are using another S-AIR sub unit,
such as a surround amplifier, do not change the
ID of the S-AIR main unit. Set the ID of the
S-AIR receiver to the same ID as the S-AIR
main unit.
• When you pair the S-AIR main unit and another
S-AIR sub unit, such as a surround amplifier, by
the pairing operation, you need to perform the
pairing operation between the S-AIR main unit
and the S-AIR receiver. For details, see
"Identifying the S-AIR main unit with a specific
S-AIR sub unit (Pairing operation)" (page 70).
2
Select the desired function on the
S-AIR receiver .
The function changes in the same sequence
as you press FUNCTION (page 34).
3
Adjust the volume on the S-AIR
receiver.
Note
• When the sound is other than 2 channel stereo, multi
channel sound is downmixed to 2 channel.
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
• Sound source is same with both the system and S-AIR
receiver.
continued
69
GB